| Author | Topic |
|---|
Location:
NSW, East Coast
Registered:
July 2003
|
 1jz injectors + fuel rail
|
Sun, 21 September 2003 13:34
|
 |
As above, $250 Includes postage to anywhere.
Can do pics, but why????
|
|
|
Location:
Gold Coast
Registered:
January 2003
|
|
Re: 1jz injectors + fuel rail
|
Mon, 22 September 2003 08:38
|
|
|
what do these injectors flow at?
|
|
|
Location:
NSW, East Coast
Registered:
July 2003
|
|
Re: 1jz injectors + fuel rail
|
Mon, 22 September 2003 09:46
|
|
Not sure, but ill find out,
There out of a jzx81t chaser.
|
|
|
Location:
Wollongong
Registered:
May 2002
|
|
Re: 1jz injectors + fuel rail
|
Mon, 22 September 2003 09:59
|
|
|
Stock 1JZ injectors are 380cc/min from memory.
|
|
|
Location:
NSW, East Coast
Registered:
July 2003
|
|
Re: 1jz injectors + fuel rail
|
Mon, 22 September 2003 10:03
|
|
Yes i believe they flow at 380cc.
Hope it helps
|
|
|
Location:
Sydney
Registered:
May 2002
|
|
Re: 1jz injectors + fuel rail
|
Mon, 22 September 2003 13:51
|
|
|
by any chance you got a set of 1j coils???
|
|
|
Location:
Gold Coast
Registered:
January 2003
|
|
Re: 1jz injectors + fuel rail
|
Mon, 22 September 2003 20:36
|
|
|
can i have a pic of the injectors? just to see there shape and also what resistance are the injectors?
|
|
|
Location:
NSW, East Coast
Registered:
July 2003
|
|
Re: 1jz injectors + fuel rail
|
Tue, 23 September 2003 01:46
|
|
Can do pics but it'll take time to borrow a digi.
The injectors are just standard 1j injectors out of a jzx81 chaser, im not sure what impedance they are.
|
|
|
Location:
Wollongong
Registered:
May 2002
|
|
Re: 1jz injectors + fuel rail
|
Tue, 23 September 2003 02:13
|
|
Yellow injectors, high impedance (again from memory).
I know that if you use the US spec Supra 480cc injectors you need to add resistors, so I guess this means that the 380cc Jap spec are high impedance.
|
|
|
Location:
Sydney
Registered:
May 2002
|
|
Re: 1jz injectors + fuel rail
|
Tue, 23 September 2003 07:57
|
|
Having played with quite a few sets of injectors now on my 1JZ-GTE, here's some info to clarify some of the speculation:
Stock 1JZ-GTE injectors (yellow) were flow tested at 360cc/min and measure about 13.8 Ohm
Drop in replacement JDM MKIV 2JZ-GTE Supra injectors (grey) flow tested 440cc/min and measured about 13.8 Ohms
Drop in replacement US Spec MKIV 2JZ-GTE Supra injectors (purple) flow tested 550cc/min and measured about 2.5 Ohms without resistor pack
All are Denso side feed type injectors
FYI, I posted a couple of sets of stock 1JZ-GTE 360cc injectors for sale at $100 and stirred no interest - good luck with the sale at $250.
|
|
|
Location:
Wollongong
Registered:
May 2002
|
|
Re: 1jz injectors + fuel rail
|
Tue, 23 September 2003 08:15
|
|
There we go, some words from the 1J master.
Thanks for clearing it all up Manny.
|
|
|
Location:
NSW, East Coast
Registered:
July 2003
|
|
Re: 1jz injectors + fuel rail
|
Tue, 23 September 2003 09:29
|
|
I remember about a month ago someone was after $400 for the same thing and he got it, so i thought $250 was reasonable.
|
|
|
Location:
Sydney
Registered:
May 2002
|
|
Re: 1jz injectors + fuel rail
|
Tue, 23 September 2003 10:57
|
|
lol @ 1J master 
FKN16V, I honestly hope you sell them for $250 ; if you do, I'll be listing my 3 sets up straight after you sell yours.
|
|
|
Location:
Sydney
Registered:
May 2002
|
|
Re: 1jz injectors + fuel rail
|
Fri, 26 September 2003 00:31
|
|
|
i need a map sensor bad!!!!
|
|
|
Location:
NSW, East Coast
Registered:
July 2003
|
|
Re: 1jz injectors + fuel rail
|
Sat, 27 September 2003 23:35
|
|
Well however wants the injectors can set the price.
No map sensor sorry.
Also have 1 good turbo, no apparent cracks around the waste gate, bugger all free play $200
|
|
|
Toymods Forum Sponsor
Location:
Brisbane
Registered:
February 2003
|
|
Re: 1jz injectors + fuel rail
|
Sun, 28 September 2003 00:44
|
|
|
Wouldnt these injectors make a good upgrade to a 20V induction setup if you were going to run turbo? Example 20V head on a GZE bottom end, then turbo? They are side feed the same as the 20V injectors. 380cc should support over 300hp @ engine with rising rate reg in that instance. Could be a good first step upgrade.
|
|
|
Location:
NSW, East Coast
Registered:
July 2003
|
|
Re: 1jz injectors + fuel rail
|
Sun, 28 September 2003 11:19
|
|
Thanx soarer21, i never thought of that, surely someone wil need them some time, i have absolutly no need for them.
How's this, turbo + injectors and fuel rail $300, ill pay for postage and send them anywhere.
Cant go wrong!!!
|
|
|
I supported Toymods
Location:
Sutho/Hills NSW
Registered:
September 2002
|
|
|
Location:
NSW, East Coast
Registered:
July 2003
|
|
Re: 1jz injectors + fuel rail
|
Mon, 29 September 2003 11:59
|
|
Do you want the fuel rail as well, if not ill pull em off and post em. $100 i can live with that. You pay postage
PM me the details
|
|
|
