| Author | Topic |
|---|
Registered:
May 2002
|
|
2TGEU engine, gilmore, microtech
|
Sun, 28 September 2003 02:34
|
 |
Have a complete (but in parts) 2T-GEU, #260 head, pistons, cams, crank in great condition. comes with points dizzy, alternator, starter (no guarentee on parts). SOLD
Gilmore pulley set, includes main crank pulley, alternator and water pump pulleys, 2 belts, one of which used for just a couple of weeks. SOLD
EFI setup- includes manifold (paid $250), cleaned 3T-GTEU injectors, loom (should work but not tested), microtech D5 computer- programmed for a 3T-GTEU(paid $220), VL fuel pump (paid more than $220 brand new). basically everything required for programmable EFI on a 2TG. SOLD
can COD interstate all parts except engine.
[Updated on: Thu, 02 October 2003 07:29]
|
|
|
Location:
Vic
Registered:
January 2003
|
|
|
Registered:
May 2002
|
|
Re: 2TGEU engine, gilmore, microtech
|
Sun, 28 September 2003 08:12
|
|
Ben- thanks for the PM, i've sent a reply.
Basically i want to sell the EFI setup together.
|
|
|
Location:
Carlingford, Sydney
Registered:
May 2002
|
|
Re: 2TGEU engine, gilmore, microtech
|
Sun, 28 September 2003 11:13
|
|
anychance of the efi gear without the fuel pump?
and how much for the Gilmore setup?
|
|
|
Location:
Perth
Registered:
May 2003
|
|
Re: 2TGEU engine, gilmore, microtech
|
Sun, 28 September 2003 12:50
|
|
Also interested in the gilmore belt set up (assuming it is for the 2TG), if EMP-2TG doesnt take it.
Thinking around $150 - $200, too low? too high?
Thanks.
|
|
|
Registered:
May 2002
|
|
Re: 2TGEU engine, gilmore, microtech
|
Sun, 28 September 2003 14:33
|
|
i've heard rumours these gilmore sets are worth a bit, but i've got no idea, they aren't the sort of thing you see at autopro. I was thinking around the $150 mark. I will try to get some pics up tommorrow.
The belt will fit any T series engine, and i'm sure the pulleys could fit just about any toyota engine if the crank pulley bolt is the same thread as a 2T.
I can sell the EFI gear without the pump, but i would want close to what i paid for the parts.
|
|
|
Location:
Perth
Registered:
May 2003
|
|
Re: 2TGEU engine, gilmore, microtech
|
Sun, 28 September 2003 14:50
|
|
Just thinking about it some more, may not fit with the supercharger pulley (currently using a 4A pulley with the extra serpentine pulley on the harmonic balancer).
Do you know how wide the crank pulley is?
Thanks.
|
|
|
Location:
Carlingford, Sydney
Registered:
May 2002
|
|
Re: 2TGEU engine, gilmore, microtech
|
Sun, 28 September 2003 23:48
|
|
|
so $500 for the efi setup?
|
|
|
Location:
Devonport, Tasmania
Registered:
July 2003
|
|
Re: 2TGEU engine, gilmore, microtech
|
Mon, 29 September 2003 00:41
|
|
|
do u have the 2tg head?? if so, what cond. is it in?? i'd be interested
|
|
|
Registered:
May 2002
|
|
Re: 2TGEU engine, gilmore, microtech
|
Mon, 29 September 2003 04:03
|
|
Emp2TG: $480+postage for the EFI manifold, loom, computer and 3TGTEU injectors. PM me with your details and I can COD them off this week. I will have to send the manifold separate to the computer.
Attached are pics of the efi 2TGEU EFI manifold, microtech computer and loom, and the 2TGEU head with the rocker cover off.
Connor:The head is in the pic, its all complete and the parts are in good condition, but there is a lot of oil sludge buildup, at the least it would need a good clean, new seals, valves sealed and re-shimed.
|
|
|
Registered:
May 2002
|
|
|
Location:
Adelaide
Registered:
May 2002
|
|
Re: 2TGEU engine, gilmore, microtech
|
Mon, 29 September 2003 06:30
|
|
lotsa pretty pictures there Rob....... hehe
free bumpo
Brendon
|
|
|
Registered:
May 2002
|
|
Re: 2TGEU engine, gilmore, microtech
|
Tue, 30 September 2003 00:23
|
|
thanks for the bump bren!
All the EFI gear has been sold except the pump. Gilmore pulley and engine still for sale.
Will sell the gilmore set for $100oho.
|
|
|
Location:
Perth
Registered:
May 2003
|
|
Re: 2TGEU engine, gilmore, microtech
|
Wed, 01 October 2003 02:17
|
|
inferno,
Unfortunately it is going to be too much stuffing about and as I only made the s/c brackets at the beginning of the year and am yet to run the engine I am reluctant to have to make them all again.
So here is another free bump
Thanks.
|
|
|
