Toymods Car Club Inc: Tech & Conversions => 1JZ Tacho wiring.....

Toymods Car Club
www.toymods.org.au

Toymods » Tech & Conversions » 1JZ Tacho wiring..... Show: Today's Posts :: Show Polls Email to friend

Author

Topic

SkiDMaN
Regular

Location:
Gold Coast
Registered:
June 2002

1JZ Tacho wiring.....	Wed, 01 October 2003 01:36

after asking a few months back about the tacho not working in my car... even with a moster tacho wired up... a few ppl said i needed to buy a tacho booster from sixworks? well... i just pulled the ecu out and wired the tacho into the RPM line.... works a treat. Pete [Report message to a moderator]

Norbie
Forums Junkie

Location:
Brisbane
Registered:
May 2002

Re: 1JZ Tacho wiring.....	Wed, 01 October 2003 02:56

The tacho booster is only required if you're trying to use the stock tacho in older cars (eg my MA61). [Report message to a moderator]

Registered:
June 2002

Re: 1JZ Tacho wiring.....	Wed, 01 October 2003 21:37

was it not working in the IG terminal in the diagnostic box?? [Report message to a moderator]

Grant
Forums Junkie

Location:
Newcastle, NSW, Australia
Registered:
May 2002

Re: 1JZ Tacho wiring.....	Wed, 01 October 2003 21:49

Norbie is quite correct. You only need a Tacho Booster if you are using a stock tacho that was originally driven from a standard ignition coil. An exception is Nissan engines that only output a 5 volt signal. [Updated on: Mon, 06 October 2003 04:12] [Report message to a moderator]

speakafreaka
Forums Junkie

Registered:
March 2003

Re: 1JZ Tacho wiring.....	Sat, 04 October 2003 02:30

do you still sell the boosters grant? [Updated on: Sat, 04 October 2003 02:30] [Report message to a moderator]

draven
Forums Junkie

I supported Toymods

Location:
Epping, Sydney
Registered:
May 2002

Re: 1JZ Tacho wiring.....	Sat, 04 October 2003 03:47

yeah, I'm curious too - would like to get my hands on one to install it while I'm wiring up everyhitng else my mtech outputs a 12v signal, designed for a/m tachos. does one of your boosters change this signal to work with the ma61 dash? [Report message to a moderator]

Jag7799
Forums Junkie

Location:
Brisbane
Registered:
July 2002

Re: 1JZ Tacho wiring.....	Sun, 05 October 2003 22:41

Hi, I was told about you by Jim(sideshow). I am putting a 1jz gte into my gz10 soarer that currently runs a 1g geu and uses digital dash. Im looking to get the tacho booster to make my digital dash's tacho work. How much will that cost me and do you have any handy? i'd like to get one next week if i could. Thanks Johal Gow [Report message to a moderator]

Grant
Forums Junkie

Location:
Newcastle, NSW, Australia
Registered:
May 2002

Sixworks Tacho Boosters	Wed, 08 October 2003 00:12

Sorry guys, I have been having lots of trouble with Optusnet lately (email and net access) but it seems to be sorted now. Cost of the Tacho Booster is $98, is locally made and has more functionality than the MSD unit. I will have stock from next week onwards. Please email me at sixworks@optusnet.com.au and I will be happy to send you technical details and an order form. Grant [Updated on: Wed, 08 October 2003 00:13] [Report message to a moderator]

SUPRAGTE
Forums Junkie

Location:
North Sydney
Registered:
May 2002

Re: 1JZ Tacho wiring.....	Wed, 15 October 2003 02:37

Did you get one Johal? I'm keen to get one after someone else has done it and i get some cash. [Report message to a moderator]

Norbie
Forums Junkie

Location:
Brisbane
Registered:
May 2002

Re: 1JZ Tacho wiring.....	Wed, 15 October 2003 02:40

I have one in my Supra (2JZ-GTE -> MA61 digital dash). It works flawlessly. [Report message to a moderator]

Jag7799
Forums Junkie

Location:
Brisbane
Registered:
July 2002

Re: 1JZ Tacho wiring.....	Wed, 15 October 2003 07:40

havent done it yet.. havent got my f-ing loan yet(thanks banks) lol [Report message to a moderator]

Previous Topic:	4agze + 175mm pulley belt length
Next Topic:	Fuel line question

Current Time: Mon Jul 28 02:59:43 UTC 2025

Total time taken to generate the page: 0.0041999816894531 seconds

.:: Contact :: Home ::.