Author | Topic |
Location: Melbourne
Registered: May 2002
|
ra65 badge
|
Sat, 20 July 2002 07:04
|
|
how much would i get for a 2.4i badge off the ra65 celicas?
|
|
|
Location: Hobart, Tas
Registered: May 2002
|
Re: ra65 badge
|
Sat, 20 July 2002 08:09
|
|
Got anything else too? I know a guy in the US who wants one, but Techie Mark hasn't got back to ANY of us.
|
|
|
Location: Melbourne
Registered: May 2002
|
Re: ra65 badge
|
Sun, 21 July 2002 13:27
|
|
i've got the blind thing for the boot, blue in color. there's a RA65 at the wreckers here but i got there too late as the indicator was already taken. the other one was there but has a hole in the side. what were you after?
|
|
|
Location: Hobart, Tas
Registered: May 2002
|
Re: ra65 badge
|
Mon, 22 July 2002 04:56
|
|
Any idea on prices? I know someone who would want the 2.4i badge, and I need the centre console piece that houses the a/c & cig lighter, plus an ashtray. Only if they're in very good nick. I wouldn't mind a fusebox either, but it all depends on how exxy the stuff is. I would like a B-pillar badge too.
|
|
|
Location: Melbourne
Registered: May 2002
|
Re: ra65 badge
|
Mon, 22 July 2002 05:38
|
|
exxy??
not sure how much it would cost but it would be pretty cheap though. only problem is that if i get it for you i'll have to send it to tasmania. I was thinking of replacing my 2.0 badge with the 2.4i one but then i'll look like even more of dickhead if i lose drags etc.. The console thing and the ashtray should be the same on the RA60's, I'm sure there would be some in your area. Is the B-pillar badge the one next to the driver/passenger window with the picture of the swan/dragon?
|
|
|
Location: Hobart, Tas
Registered: May 2002
|
Re: ra65 badge
|
Mon, 22 July 2002 06:24
|
|
Postage doesn't bother me. Some places charge a bit for badges because they're.. well, badges. I don't have any in my area, that's why I'm asking!The console is he same item between all xa6x's (well, maybee not Carinas but certainly Celicas and Supras) The Silver dragon badge on the black/silver mesh background from the B-pillar is the one I'm after, yes. To remove it, you have to pull off the interior b-pillar trim and then there are 2 bolts that hold the outside B-pillar bit on. I imagine the badge has a small screw holding it onto the outside trim like the front grill does - levering it off with a screwdriver will most likely stuff it.
|
|
|
Location: Melbourne
Registered: May 2002
|
Re: ra65 badge
|
Mon, 22 July 2002 12:44
|
|
yeah i tried to get the badge off the supra with a screwdriver but it's too damn hard. somebody else had already removed the pillar from the other side.
|
|
|
Location: Hobart, Tas
Registered: May 2002
|
Re: ra65 badge
|
Mon, 22 July 2002 12:47
|
|
Email me at stefan@speedtoys.comif you like. Easier than the forums
|
|
|