| Author | Topic |
|---|
Location:
Sydeny
Registered:
May 2003
|
|
|
I supported Toymods
Toymods Club Secretary
Location:
Sydney
Registered:
May 2002
|
|
Re: AE92 sedan with 4AGZE and Levin Dash
|
Tue, 14 October 2003 21:52
 
|
 |
Damn that thing looks perfect!  Good work! 
|
|
|
Location:
Sydney
Registered:
April 2003
|
|
Re: AE92 sedan with 4AGZE and Levin Dash
|
Wed, 15 October 2003 00:39
|
|
|
That looks very nice. How much did the whole project cost?
|
|
|
Location:
Richmond NSW
Registered:
September 2003
|
|
Re: AE92 sedan with 4AGZE and Levin Dash
|
Wed, 15 October 2003 10:01
|
|
hey that looks real nice.
Did the dash from the levin fit straight in or did u have to modifie that as well as all the ducts i was trying to put the AE111 Dash into My AE93 seca but it was about an inch to long. so it didnt fit did u. is that what u had to modifie or just the other stuff. ??????
cheers
|
|
|
Club Member
Location:
Sydney, NSW
Registered:
May 2002
|
|
Re: AE92 sedan with 4AGZE and Levin Dash
|
Wed, 15 October 2003 11:02
|
|
Sweet ride man...
I should be at the meeting too...
And shall I be seeing this Rolla at the megacruise???
|
|
|
Location:
Sydeny
Registered:
May 2003
|
|
Re: AE92 sedan with 4AGZE and Levin Dash
|
Wed, 15 October 2003 14:44
|
|
Thanks for your thoughts and I'm real happy with the way its turned out, but there is always more I would like to do but it all cost more money.
Hotrolla - You aksed about the cost for the whole project. Well this includes central locking alarm, seats (GTZ Levin), Engineering, blue slips, 12 months rego, EFI fule tank and lines, Levin front cut, wheels and tyres, stereo, new clutch, water pumps etc and heaps of other bits renewed. Also this is not including the purchase of the car or the respray 4 years ago. I have spent about $7500 with receipts. There are numerous little cost that I haven't mentioned but they all add up. Thought I was going to get away with it for about $5000 at the start, but as usual the budget gets blown out.
Matt20v - No the dash didn't fit and was a lot of work. The width (door to door) was ok, but the section under the windscreen had to be cut back about 20-25mm. Combination of Levin and Australin car under dash ducting and as I said I had to make the entire width of the demister vents out of fiberglass. This is a photo of the ducting I made up and as you can see the new ducting is a lot narrower than the orginal one. This being because I cut the dash back as mentioned.
|
|
|
Location:
Richmond NSW
Registered:
September 2003
|
|
Re: AE92 sedan with 4AGZE and Levin Dash
|
Wed, 15 October 2003 22:39
|
|
Ohh yeah thats what i thought my problem was door to door it was just a bit to big which sucked cause it would be the only seca like it would have been sick i hope to find someone that can modifie it for me so i can but that dash back in with all the nice gadagets that come with that model (digital buttons for direction of air and stuff). how much did it cost to get the fiberglass done where from ???
cheers
|
|
|
Location:
Camden
Registered:
July 2002
|
|
Re: AE92 sedan with 4AGZE and Levin Dash
|
Thu, 16 October 2003 10:50
|
|
i really like!!!
Nice ride dude 
|
|
|
Location:
Sydeny
Registered:
May 2003
|
|
Re: AE92 sedan with 4AGZE and Levin Dash
|
Sun, 19 October 2003 11:55
|
|
|
Matt20v - You asked about the fiberglasing. I actually bought the products seperate (firbreglass, resin, hardner etc) for $80 and had to make the moulds and make the entire thing myself. As I mentioned, this took me about an extra 2 weeks to go through the process including the making of the moulds. Kevin
|
|
|
Location:
Sydeny
Registered:
May 2003
|
|
|
Location:
Sydney, Australia
Registered:
October 2003
|
|
Re: AE92 sedan with 4AGZE and Levin Dash
|
Sun, 02 November 2003 01:16
|
|
thats one neat and clean rolla! i like it
nice rims though (copycat  )
|
|
|
Location:
Sydeny
Registered:
May 2003
|
|
|
I supported Toymods
Location:
Sutho/Hills NSW
Registered:
September 2002
|
|
Re: AE92 sedan with 4AGZE and Levin Dash - NOW FOR SALE
|
Tue, 02 December 2003 06:10
|
|
|
nah kevin isnt it "show us your receipt?"
|
|
|
