| Author | Topic |
|---|
I supported Toymods
Location:
melbourne.victoria.austra...
Registered:
June 2002
|
|
|
I supported Toymods
Location:
Perth, Western Australia
Registered:
December 2002
|
|
Re: AW11 4AGZE alternator mount
|
Wed, 15 October 2003 11:22
 
|
 |
|
I have a mid mount bracket that I made for the exhaust side to mount a 4AGZE alternator to the motor, is that any good for your purpose?
|
|
|
Location:
Melbourne
Registered:
May 2002
|
|
Re: AW11 4AGZE alternator mount
|
Thu, 16 October 2003 00:22
|
|
greg - not that you would have ot use a 4agze alternator with this setup (different to n/a 4age type - with external regualtor)
bloody things have bigger bearings - you think it needs to be heavier duty for a s/c car?
T
|
|
|
I supported Toymods
Location:
melbourne.victoria.austra...
Registered:
June 2002
|
|
Re: AW11 4AGZE alternator mount
|
Thu, 16 October 2003 08:05
|
|
clintgodde, where did you hang the adjuster from out of interest?
T - yes i think it may need to be a slightly heavier dutier variety. am using the stock 2T alternator on mine with a pulley from a normal 4AGE alt - same dia as the 2T one just multi ribbed. interesting that the GZE uses a external regulator tho.
|
|
|
I supported Toymods
Location:
Perth, Western Australia
Registered:
December 2002
|
|
Re: AW11 4AGZE alternator mount
|
Thu, 16 October 2003 08:34
|
|
|
Adjuster was swung off the head, near the timing case cover from memory, only used one of the M6x1.5 bolts to mount it, but never had a problem. I could make one to suit any type of alternator, not just the 4AGZE style too.
|
|
|
I supported Toymods
Location:
melbourne.victoria.austra...
Registered:
June 2002
|
|
Re: AW11 4AGZE alternator mount
|
Thu, 16 October 2003 10:24
|
|
its ok. got it sussed now.
the alignment problem i had was spacing of the bracket downstairs
the adjuster i'm hanging off one of the dizzy mounting holes. all good.
|
|
|
