| Author | Topic |
|---|
Location:
coffs harbour
Registered:
July 2003
|
 ra 23 18 rg forced induction conversion
|
Sun, 26 October 2003 09:51
|
 |
hi there,
i have a ra 23 with 18rg fuel injected,
i wanna put a forced induction motor into it but due to cross member position i dunno what will fit .
3t will be a funny fit.
any idea's (peolpe that have done conversion or have it done)
thanks
|
|
|
Location:
Brisbane
Registered:
May 2002
|
|
Re: ra 23 18 rg forced induction conversion
|
Sun, 26 October 2003 10:00
|
|
Just source a TA23 crossmember; it's designed for T series engines and will bolt right into your chassis.
Note: a TA22 crossmember will NOT fit. It must be from a TA23.
|
|
|
Location:
Newcastle
Registered:
April 2003
|
|
Re: ra 23 18 rg forced induction conversion
|
Sun, 26 October 2003 10:08
|
|
|
what bout a 1ggte, its an easy fit aint it?
|
|
|
Location:
Brisbane
Registered:
May 2002
|
|
Re: ra 23 18 rg forced induction conversion
|
Mon, 27 October 2003 03:38
|
|
Well, it's relatively easy for an engine conversion, but still no walk in the park. Do a search or check out the tech section for more info, this has been covered plenty of times.
|
|
|
