| Author | Topic |
|---|
Location:
Syndey
Registered:
December 2002
|
|
Sydney Dyno Day
|
Tue, 18 November 2003 04:41
|
 |
Guys,
i am organising a dyno day at MRC automotive in Castle Hill,
MRC has the lastest 2wd dyno dynamics with the lastest Shoot out modes etc, the dyno is only a few months old.
cost will be about $50 for 2 pulls with 02 sensor readings and print outs (power graph and data log from the run with all info on it) no leaded fuel can be used with the 02 sensor unless you supply your own LSM11 sensor,
all runs will be done in shoot out mode, and either myself or Mark from MRC will be driving the dyno.
Date to be conformed, will be mid December tho
Let me know if you are interested,
Dale
|
|
|
Location:
Sydney Miranda / Perth Mu...
Registered:
November 2003
|
|
Re: Sydney Dyno Day
|
Tue, 18 November 2003 07:06
|
|
I am intrested in the Dyno day that you are planning. Hopefully my car will be out of the shop by then. Will the dyno runs include any tuning? (minor minor tuning??)
Cheers
Mike
|
|
|
Location:
Syndey
Registered:
December 2002
|
|
Re: Sydney Dyno Day
|
Tue, 18 November 2003 08:05
|
|
we probably wont be doing any tuning, if you have a microtech and it needs a little i will do it FOC, also depends on how may cars we have there as well
Dale
|
|
|
Location:
sydney
Registered:
April 2003
|
|
Re: Sydney Dyno Day
|
Wed, 19 November 2003 08:40
|
|
|
yeah get a date, i'm interested to see what a 3s-fte could do, hope it isnt the 14th though.
|
|
|
Registered:
August 2002
|
|
Re: Sydney Dyno Day
|
Wed, 19 November 2003 11:38
|
|
Interested yes, date pending.
Will we be able to get an idea of the mixtures from the o2 sensor then?
|
|
|
Location:
NSW, East Coast
Registered:
July 2003
|
|
Re: Sydney Dyno Day
|
Wed, 19 November 2003 11:59
|
|
Im the same as black supra.
Keen to see the new power output with timing all fixed.
|
|
|
Location:
Syndey
Registered:
December 2002
|
|
Re: Sydney Dyno Day
|
Wed, 19 November 2003 21:22
|
|
Ok guys,
the 14th of december is the only date we can run it,
dont worry this wont be the last one we do!!
yes all mixtures will be checked and a printout will be supplied with the mixtures on it so you can see exactly what is going on,
i will advise you all now if the car is running lean and i dont think it is safe i will abort the run,
basically we will be starting at about 8:30, sausage sizzle will be on from 9, cold drinks will be avaliable,
trophys will be given to the following
highest 4cyl
highest 6cyl
highest v8
highest rotor
and Lowest power of the day!
its all about fun, so bring the cars out and give them a run, there will also be some very switched on guys there offering advice on how to get more power from your car,
let me know who is coming as there are only 50 spots avaliable and its first in best dressed, if you post here you are coming a spot will be held for you.
Dale
|
|
|
Location:
Sydney
Registered:
June 2003
|
|
Re: Sydney Dyno Day
|
Thu, 20 November 2003 01:53
|
|
I am coming  Be interested to know what mine is putting out
|
|
|
Location:
Syndey
Registered:
December 2002
|
|
Re: Sydney Dyno Day
|
Thu, 20 November 2003 02:07
|
|
Execlent mate,
ill put you on the list!
Dale
|
|
|
Location:
Sydney
Registered:
June 2003
|
|
Re: Sydney Dyno Day
|
Thu, 20 November 2003 02:10
|
|
|
One question. I take it that is 8.30 in the evening????
|
|
|
Location:
Syndey
Registered:
December 2002
|
|
Re: Sydney Dyno Day
|
Thu, 20 November 2003 02:39
|
|
no its 8:30 am on sunday the 14th
Dale
|
|
|
Location:
Sydney
Registered:
June 2003
|
|
Re: Sydney Dyno Day
|
Thu, 20 November 2003 02:52
|
|
|
Ah ok. Glad I checked.
|
|
|
Location:
Syndey
Registered:
December 2002
|
|
Re: Sydney Dyno Day
|
Thu, 20 November 2003 02:54
|
|
we will probably still be going at 8:30pm tho!
there are some big power cars coming along as well, looking for 500+ out of a few rotors,
Dale
|
|
|
Location:
Sydney
Registered:
June 2003
|
|
Re: Sydney Dyno Day
|
Thu, 20 November 2003 03:03
|
|
|
Oh. I am expecting no more that 185
|
|
|
Location:
Syndey
Registered:
December 2002
|
|
Re: Sydney Dyno Day
|
Thu, 20 November 2003 03:10
|
|
what sort of car is it??
dale
|
|
|
Location:
Sydney
Registered:
June 2003
|
|
|
Location:
Syndey
Registered:
December 2002
|
|
Re: Sydney Dyno Day
|
Thu, 20 November 2003 03:22
|
|
nice ride dude!
Dale
|
|
|
Location:
NSW, East Coast
Registered:
July 2003
|
|
Re: Sydney Dyno Day
|
Thu, 20 November 2003 10:54
|
|
Might as well give me the trophy for lowest power output know.
|
|
|
Location:
Syndey
Registered:
December 2002
|
|
Re: Sydney Dyno Day
|
Thu, 20 November 2003 21:47
|
|
i dont know dude there are a few stock rotors going that will make bugger all!
Dale
|
|
|
Location:
North Sydney
Registered:
May 2002
|
|
Re: Sydney Dyno Day
|
Fri, 21 November 2003 05:41
|
|
I'll be there 
Just tested the new boost controller, low setting is working at 12psi nicely. Lock me in eddy!
|
|
|
Location:
Yowie Bay, Sydney
Registered:
June 2002
|
|
Re: Sydney Dyno Day
|
Fri, 21 November 2003 07:28
|
|
yeh i'll be there for sure
either that or the new owner of my car will be forced there
maybe i'll borrow it! haha
|
|
|
Location:
Sydney
Registered:
February 2003
|
|
|
Registered:
August 2002
|
|
Re: Sydney Dyno Day
|
Fri, 21 November 2003 10:45
|
|
Locknuts prevent the removal of my rims 
I wouldnt fear the mighty 5ME of breaking traction 
|
|
|
Location:
www.geocities.com/drextacy
Registered:
August 2003
|
|
Re: Sydney Dyno Day
|
Fri, 21 November 2003 16:50
|
|
|
heya sounds interesting, count me in, are there any special preparations to be done to the car, or is just a simple matter of drive in, hammer it and chek ya later?
|
|
|
Location:
Sydney
Registered:
February 2003
|
|
Re: Sydney Dyno Day
|
Sat, 22 November 2003 02:07
|
|
|
nah they dont let retreads on the dyno, coz i guess they will fly off above 140kmh, hence my need for non retreaded tyres
|
|
|
Registered:
August 2002
|
|
Re: Sydney Dyno Day
|
Sat, 22 November 2003 03:42
|
|
|
assuming the 5ME makes peak power after 140kmh? haha
|
|
|
Location:
www.geocities.com/drextacy
Registered:
August 2003
|
|
Re: Sydney Dyno Day
|
Sat, 22 November 2003 05:52
|
|
oh ok, wel i have retreads, is it going to b a prob? im thinking of gettin rims in the near future, so hopefully by then i will have normal tyres on them
does any one have advice on retreads, ie grip, safety, road noise, value, etc.
while im at it. does any one know what the lightest rims are made of, and any other info on such lightweight wheels?
ive heard gettin bigger sized rims slower your acceleration is this true? if so, why do pple get bigger rims in the first place? i thought they were faster?
|
|
|
Location:
www.geocities.com/drextacy
Registered:
August 2003
|
|
Re: Sydney Dyno Day
|
Sat, 22 November 2003 05:54
|
|
|
whoops. didnt see, so they dont, for 100% let em on the dyno, what if you only accelarate in the lowest gear, cant they derive the peak power figures from that?
|
|
|
Location:
Sydney
Registered:
February 2003
|
|
Re: Sydney Dyno Day
|
Sun, 23 November 2003 00:20
|
|
they usually use 4th because it is a 1:1 gear.
therefor u are taking the power of the engine, if you used 1st gear then it would be taking the extra torque from the gearbox too, and u would get crazy readings.
retreads are god awful, terrible grip, road noise aint too bad,
but i would never buy them
|
|
|
Registered:
April 2003
|
|
Re: Sydney Dyno Day
|
Sun, 23 November 2003 04:00
|
|
Im interested ..... can anyone give me the address ?
Cheers
Andrew
|
|
|
Location:
www.geocities.com/drextacy
Registered:
August 2003
|
|
Re: Sydney Dyno Day
|
Sun, 23 November 2003 06:22
|
|
|
thanks for that! well im going to absolve myself of responsibility for my retreads as my dad bought them, now wats the quickest way to wear tyres out?
|
|
|
Location:
NSW, East Coast
Registered:
July 2003
|
|
Re: Sydney Dyno Day
|
Sun, 23 November 2003 09:46
|
|
The quickest way to wear out tyres.
Give your car to me for 10/15 mins, ill fix it for ya.
|
|
|
Registered:
March 2003
|
|
Re: Sydney Dyno Day
|
Sun, 23 November 2003 22:55
|
|
i'll like to give it a try rx7
never been to one and id be interested to see how much my car does with the s/c b4 I turbocharge it?
so count me in as long as i dont totally forget about it and sleep in
|
|
|
I supported Toymods
Location:
Plumpton/sydney
Registered:
November 2003
|
|
Re: Sydney Dyno Day
|
Mon, 24 November 2003 08:50
|
|
|
If the toy is finished Ill be there Id like to see if my 1ggte has more power than others
|
|
|
Club Member
Location:
Sydney, NSW
Registered:
May 2002
|
|
Re: Sydney Dyno Day
|
Mon, 24 November 2003 09:59
|
|
| FKN16V wrote on Sun, 23 November 2003 20:46 |
The quickest way to wear out tyres.
Give your car to me for 10/15 mins, ill fix it for ya.
|
15 mins!!! Give it to me for 5 mins...
|
|
|
Location:
Sydney Miranda / Perth Mu...
Registered:
November 2003
|
|
Re: Sydney Dyno Day
|
Tue, 25 November 2003 07:46
|
|
Keen as mustard!!! Pencil this Mo -Foa in!
Mike
|
|
|
Location:
Syndey
Registered:
December 2002
|
|
Re: Sydney Dyno Day
|
Mon, 08 December 2003 06:12
|
|
alright guys
this is still go ahead!
so far we have
MIKE_JZA70_TYPE_R
Siktoy ra23
FKN16V
Caledwvech
SUPRAGTE
Dabbid
STR8 2.8
krayzie maybe??
address is
MRC
unit C5, 2A victoria ave
castle hill
start at 8:30 am and go on from there!
Dale
|
|
|
I supported Toymods
Location:
Plumpton/sydney
Registered:
November 2003
|
|
Re: Sydney Dyno Day
|
Mon, 08 December 2003 07:22
|
|
Sorry fellas the siktoy Wont be ready I am getting it dyno tuned on the following friday 
But I wish I was there
|
|
|
Toymods member
I supported Toymods
Location:
Rydalmere, NSW
Registered:
May 2002
|
|
Re: Sydney Dyno Day
|
Mon, 08 December 2003 12:14
|
|
Is this a 2WD or a 4WD dyno? 
|
|
|
Location:
www.geocities.com/drextacy
Registered:
August 2003
|
|
Re: Sydney Dyno Day
|
Mon, 08 December 2003 13:16
|
|
|
wil b ther watchin everyone! n providin morale support! cheerboi if u will
|
|
|
Location:
Epping, Sydney
Registered:
April 2003
|
|
Re: Sydney Dyno Day
|
Mon, 08 December 2003 22:49
|
|
|
so what day is it?
|
|
|
Location:
Sydney
Registered:
June 2003
|
|
Re: Sydney Dyno Day
|
Mon, 08 December 2003 22:56
|
|
|
This coming Sunday the 14th.
|
|
|
Location:
Sydney
Registered:
February 2003
|
|
Re: Sydney Dyno Day
|
Tue, 09 December 2003 05:56
|
|
sorry champ, but i am now no longer going to be attending.
|
|
|
Location:
www.geocities.com/drextacy
Registered:
August 2003
|
|
Re: Sydney Dyno Day
|
Tue, 09 December 2003 09:03
|
|
|
GIV ME A T...T,,,give m e O....O! and so on
|
|
|
Location:
Sydney Miranda / Perth Mu...
Registered:
November 2003
|
 Re: Sydney Dyno Day
|
Thu, 11 December 2003 04:42
|
|
Guys,
I am unable to attend, it seems that it is niegh on impossible
to find a set of syncros for my car .... sorry guys.
Mike
|
|
|
Location:
www.geocities.com/drextacy
Registered:
August 2003
|
|
Re: Sydney Dyno Day
|
Thu, 11 December 2003 05:47
|
|
aww bro! das a shame, but dont u just use a emulsified synchornic velocitator, i hear that BOTH the spin tranquility and initial torque drive are 10, no 11! times better, then a stock standard synchro, stock meaning the one u get when the car is new, u know, str8 of the boat, no mods, YES!
.but no, or u culd hire a car?
|
|
|
Location:
Sydney Miranda / Perth Mu...
Registered:
November 2003
|
|
Re: Sydney Dyno Day
|
Thu, 11 December 2003 07:11
|
|
|
Say What??????
|
|
|
Location:
NSW, East Coast
Registered:
July 2003
|
|
Re: Sydney Dyno Day
|
Thu, 11 December 2003 13:18
|
|
GOOD:
I was all keen to attend, got new release bearing, new spigot bearing.
BAD:
Sump gasket fuked, have blowby issues, and different cam covers havent arrived yet.
Ill have to what till dyno day in january, good luck to everybody.
Steve
|
|
|
Location:
www.geocities.com/drextacy
Registered:
August 2003
|
|
Re: Sydney Dyno Day
|
Sun, 14 December 2003 01:15
|
|
oooh just woke up, guess i cudlnt make it after all 
|
|
|
Location:
NSW, East Coast
Registered:
July 2003
|
|
Re: Sydney Dyno Day
|
Sun, 14 December 2003 13:57
|
|
How did you guys and/or girls go, hope it was all good, tell us results.
Steve
|
|
|
Location:
Sydney
Registered:
June 2003
|
|
Re: Sydney Dyno Day
|
Mon, 15 December 2003 02:57
|
|
Yeah, not too bad. A little less than I was hoping for, but not too bad for a benchmark figure.
164.4rwkw at 152km/h in 4th.
|
|
|
Location:
Syndey
Registered:
December 2002
|
|
Re: Sydney Dyno Day
|
Mon, 15 December 2003 06:44
|
|
Paul aka supragte got 330 odd HP to win 6cyl
i made 405.6 hp to win top rotary,
Mr heli made 501hp to with killowatt king
Dale
|
|
|
Location:
North Sydney
Registered:
May 2002
|
|
Re: Sydney Dyno Day
|
Mon, 15 December 2003 08:50
|
|
|
cheers mate! Gotta get that tune done soon
|
|
|
Location:
NSW, East Coast
Registered:
July 2003
|
|
Re: Sydney Dyno Day
|
Mon, 15 December 2003 13:50
|
|
Im impressed (which isnt hard these days)
What was mr heli running. 501hp is serious poke.
|
|
|
Location:
Syndey
Registered:
December 2002
|
|
Re: Sydney Dyno Day
|
Mon, 15 December 2003 22:12
|
|
paul,
no worries man let me know when you are ready.
FKN16v
it has a 13b turbo, ta45 turbo etc etc, it has run 9.5
Dale
|
|
|
Location:
www.geocities.com/drextacy
Registered:
August 2003
|
|
Re: Sydney Dyno Day
|
Wed, 17 December 2003 04:45
|
|
|
who did lowest?
|
|
|
Registered:
March 2003
|
|
Re: Sydney Dyno Day
|
Wed, 17 December 2003 05:05
|
|
|
what were all the other results?
|
|
|
(glen.... 
)
