| Author | Topic |
|---|
I supported Toymods
Location:
Sutho/Hills NSW
Registered:
September 2002
|
 WTD: 4AGE 20V Manifold Gasket
|
Wed, 26 November 2003 06:42
|
 |
|
As topic states, thanks.
|
|
|
Location:
Sydney
Registered:
October 2003
|
|
Re: WTD: 4AGE 20V Manifold Gasket
|
Wed, 26 November 2003 07:46
|
|
I have one slightly bent looking but looks like it would be good if bolted up and flattened out. Not sure which side it's from (or actually if it is a 20v one (it just came with a bunch of spare bits when I bought a 20v off a friend of a friend), it's two ply metal if that helps.
http://forums.toymods.org.au/index.php?t=msg&t h=23847&start=0&rid=3884&S=3fcead88b7b df6f8c9ff56ca0066dac6
You can't see it in the pictures because it's sitting inside the plenum, but I can pull it out and take a photo tomorrow night for you if you're keen.
Cheers
Dave
|
|
|
I supported Toymods
Location:
Sutho/Hills NSW
Registered:
September 2002
|
|
Re: WTD: 4AGE 20V Manifold Gasket
|
Wed, 26 November 2003 07:50
|
|
|
do you have an estimate of what you would be after for it?
|
|
|
Location:
Sydney
Registered:
October 2003
|
|
Re: WTD: 4AGE 20V Manifold Gasket
|
Wed, 26 November 2003 07:57
|
|
Wouldn't have a clue.
Have a look at the pictures when I send them to you, see if it's what you need, think of what it's worth (as is), halve it, and that'll do  .
|
|
|
I supported Toymods
Location:
Sutho/Hills NSW
Registered:
September 2002
|
|
Re: WTD: 4AGE 20V Manifold Gasket
|
Wed, 26 November 2003 08:04
|
|
ok thanks, yea pictures should be able to determine if its what im after.
thanks alot
you dont have a tps there at all either do you? 
|
|
|
Location:
Sydney
Registered:
October 2003
|
|
|
