Author | Topic |

Location: Canberra
Registered: May 2002
|
What to pay for HalfCut
|
Mon, 01 December 2003 06:33
|
 |
Can anyone give me an Idea on what the following engines in a halfcut would cost:
2JZGTE-
1JZGTE-
1UZFE-
1GGTE-
|
|
|
Location: Brisbane
Registered: July 2003
|
Re: What to pay for HalfCut
|
Mon, 01 December 2003 06:58

|
 |
- From $3,500 (Auto)
- From $2500
- From $2000
- From $2000
Enjoy...
|
|
|

Location: Behind you
Registered: May 2003
|
Re: What to pay for HalfCut
|
Mon, 01 December 2003 08:24

|
 |
Damn, if i could find a 1uz half cut in Vic for 2k id be a happy f**ker.
Toyospares want 3k for one.
|
|
|

I supported Toymods
Location: Australia
Registered: November 2003
|
Re: What to pay for HalfCut
|
Mon, 01 December 2003 09:15

|
 |
Every 1UZ I was quoted for (only Crown Majesta btw) was from 2200 to 2800
If you plan on running a different ECU to factory (ie Microtech, Autronic etc etc), and/or a different Gbox to factory (ie, what Norbie has done) then just get the motor with a cut loom, or just motor, loom and ecu
Don't pay for things you wont use
|
|
|
Location: Melbourne Eastern Suburbs
Registered: October 2002
|
|
|

Location: Perth
Registered: August 2003
|
Re: What to pay for HalfCut
|
Mon, 01 December 2003 13:52

|
 |
well 1g-gte half cut cost about $1500 i've seen
but i'm getting everything out of my friends 90 supra when he gets his 1jz halfcut
|
|
|

Location: Melbourne
Registered: November 2003
|
Re: What to pay for HalfCut
|
Tue, 02 December 2003 04:37

|
 |
Can you get a 2JZ-GTE vvt-i half cut?
|
|
|

Location: Perth
Registered: November 2002
|
Re: What to pay for HalfCut
|
Tue, 02 December 2003 05:07

|
 |
jackel wrote on Mon, 01 December 2003 21:52 | well 1g-gte half cut cost about $1500 i've seen
but i'm getting everything out of my friends 90 supra when he gets his 1jz halfcut
|
that sounds pretty reasonable. Where's that from?
|
|
|

Location: Brisbane
Registered: May 2002
|
Re: What to pay for HalfCut
|
Wed, 03 December 2003 14:43

|
 |
That would have to be an auto cut. Manual cuts go for $2k and upwards these days.
|
|
|

Location: Perth
Registered: August 2003
|
Re: What to pay for HalfCut
|
Wed, 03 December 2003 14:51

|
 |
i just do a search on yahoo for half cuts n there like dozons with 1g's but therre all over east
|
|
|

Location: Perth
Registered: October 2002
|
Re: What to pay for HalfCut
|
Thu, 04 December 2003 08:55
|
 |
Shipping a half-cut to WA isn't toooo harsh. I paid around $500, but could have got it down around the high $300's. Engine packages on a pallet are much less. Regardless, it's almost always cheaper to pay shipping than local WA prices!
Also, keep an eye on the Quoka - there have been a few 1GGTE's over the years.
Justin
|
|
|