| Author | Topic |
|---|
Location:
sydney
Registered:
January 2003
|
|
how to tell physical differences between GE vs GZE
|
Thu, 04 December 2003 03:48
|
 |
|
hey guys i was just wondering how would u tell the physical difference, i know the cam covers, and doing a compression test, is there any other ways ? ? cause this car i am going to look at, could of done a dodgy by sticking a GE motor with a supercharger, but how would i tell the difference in physical appearances without having to take the motor apart ?
|
|
|
Location:
Sydney
Registered:
November 2003
|
|
Re: how to tell physical differences between GE vs GZE
|
Thu, 04 December 2003 04:04
|
|
give it 8000rpm and step off the clutch in 2nd gear 200 times. My gze stood up to it... i doubt a ge would  hehe.
|
|
|
Location:
Rocky Mountains, Canada
Registered:
May 2002
|
|
|
Location:
Canberra
Registered:
May 2002
|
|
Re: how to tell physical differences between GE vs GZE
|
Thu, 04 December 2003 12:43
|
|
MWP: Read his post again:
| Quote: |
could of done a dodgy by sticking a GE motor with a supercharger
|
[edit] never mind, you obviously already re-read, since your post is gone  
sprintr:
I seriously doubt that anyone would go to that hassle, but if by some chance they have fitted an early (bluetop) 4AGE with a blower, you will notice that there is no external oil drain from the back of the head to the block on the driver's side. You should also note whether the motor is fitted with a distributor, or the GZE cam angle sensor & individual coil packs.
|
|
|
