| Author | Topic |
|---|
Location:
Melbourne
Registered:
May 2002
|
|
Sprinter Front Lip Action (on the cheap)
|
Thu, 11 December 2003 05:36
|
 |
Strolling through my local self werve wreckers, as i do on a thursday. I spy a Corona MKII, mmm diff, ten ra60's, numerous corollas and of course many coronas. Hiding down the back of the Toyota section, 2 MX73's. Wonder if they have a front lip that's salvageble, they often get minced because people insist on tapping the kerb when they park. oooh, there's one left, a bit scruffy, but for a measly $13 how could i pass it up 
Armed with my newly aquired MX73 front lip, a cordless drill, shiney socket set(cash converters has a great selection of laundered tools) and all the screws i nixed from the self serve, i proceded with the install. Quite simple remove bumper, attach lip via drilling new holes and using supplied screws  You need to chop out about 12cms of the passenger side one as it will be too wide, you don't wanna make the join in the centre as the drivers side has a extension which helps it hold to the passenger side. Take time to straighten out bumper mounts too, mine were quite bent, checked on the spare car to see how they should look.
All put back together, bumper back on, wow no spare parts Time taken hour and a half.
I know i've forgotten something. oh 3:30, time to pick up the sister. Halfway through the intersection, i can hear something, somewhat muffled by tyre squeal and QTB roar.
Damn i left the blinker wires off, speed blinkers for now.
on off on off on off double time.
Daniel
Before
After
It only looks lower because I parked a little further forwards, in the ditch.
|
|
|
Location:
Terrigal
Registered:
May 2002
|
|
Re: Sprinter Front Lip Action (on the cheap)
|
Thu, 11 December 2003 05:59
|
|
|
Nice how rare are MX73's? I can't even picture what they look like.
|
|
|
Location:
Melbourne
Registered:
May 2002
|
|
Re: Sprinter Front Lip Action (on the cheap)
|
Thu, 11 December 2003 06:04
|
|
It's just a 80's cressida, go to any bowling club and you'll find one.
/me puts flame proof suit on
Daniel
|
|
|
I supported Toymods
Location:
Australia
Registered:
November 2003
|
|
Re: Sprinter Front Lip Action (on the cheap)
|
Thu, 11 December 2003 06:11
|
|
No no, bowling club me away, I like the grandpa status, it keeps the cops away!!
as for a pic
Front lip included
And that looks pretty good on a Sprinter
|
|
|
Location:
Melbourne
Registered:
May 2002
|
|
Re: Sprinter Front Lip Action (on the cheap)
|
Thu, 11 December 2003 06:33
|
|
Nice cressi, my aunty had a white one, i was gonna get the lip off that, but they never told me they got rid of it. It used to be owned by a spray painter, so it had a pinky pearl through it. It was in mint condition till my cousins learned to drive in it.
Daniel
|
|
|
Location:
Melb
Registered:
May 2002
|
|
Re: Sprinter Front Lip Action (on the cheap)
|
Thu, 11 December 2003 17:36
|
|
macguyver strikes again! 
|
|
|
I supported Toymods
Toymods Club Secretary
Location:
Sydney
Registered:
May 2002
|
|
Re: Sprinter Front Lip Action (on the cheap)
|
Thu, 11 December 2003 22:36
|
|
Cool  
|
|
|
Location:
melbourne
Registered:
July 2003
|
|
Re: Sprinter Front Lip Action (on the cheap)
|
Fri, 12 December 2003 02:15
|
|
for the people in melb, pick - a - part has quiet a few cressidas there with bumpers and in good nick...
Nate
|
|
|
Location:
Randwick Sydney
Registered:
November 2003
|
|
Re: Sprinter Front Lip Action (on the cheap)
|
Sat, 13 December 2003 23:19
|
|
|
I like ;p
|
|
|
