| Author | Topic |
|---|
Location:
Sydney (Campbelltown...!)
Registered:
December 2003
|
|
brake anti rattle clips
|
Thu, 01 January 2004 09:22
|
 |
I am experiancing bad rattling sounds from my front brakes so i pulled them apart after reading the manual and discovered that the anti rattle clips are missing...!!
does anyone know where you can buy them from or have any that i could have...?
|
|
|
I supported Toymods
Location:
Riverview Sydney
Registered:
July 2002
|
|
Re: brake anti rattle clips
|
Thu, 01 January 2004 12:35
|
|
What sought of car, I have an MA61 and I lost one clip on the drivers side and the pad was rattling everytime I went over a bump  it was driving me crazy. I had to get some clips from the toyota dealer, but be carefull it was not the anti rattle clip it was another clip that that the pad sits on. Cost me nine bucks and a shit load of stuffing around.
|
|
|
Location:
Sydney (Campbelltown...!)
Registered:
December 2003
|
|
Re: brake anti rattle clips
|
Fri, 02 January 2004 05:37
|
|
i have a sprinter...
yah i got 2 for the pad closest to the wheel but i just need the other two for the inner pad (top and bottom) and another 1 for the inner pad in the middle (on each side this is)...
|
|
|
Location:
c'town, NSW
Registered:
May 2002
|
|
Re: brake anti rattle clips
|
Fri, 02 January 2004 05:42
|
|
flog bag i have a mate who may have a spare set of clips from some MA61 calipers, we are both in scrambletown if u wanna come compare.
ill talk to him and see if hes willing to part with them
|
|
|
I supported Toymods
Location:
melbourne
Registered:
June 2002
|
|
Re: brake anti rattle clips
|
Fri, 02 January 2004 06:09
|
|
|
flogbag, i tried to find some a while ago and had no luck, i think little clips such as that are hard to get, when i had to get a clip i had a mate who works at toyota get one, he said they just have a big box of mixed stuff and find one that looks the same.
|
|
|
I supported Toymods
Location:
Perth, Western Australia
Registered:
December 2002
|
|
Re: brake anti rattle clips
|
Fri, 02 January 2004 06:14
|
|
|
I've got spare anit rattle clips for Aus Spec AE86's, PM me your address and I'll post some to you.
|
|
|
