| Author | Topic |
|---|
Registered:
August 2002
|
|
Flywheel sizes 7M and 2J
|
Thu, 08 January 2004 11:46
|
 |
7mge and 2jzge (manuals)
Are the flywheels identical, including the bolt locations?
ta.
|
|
|
Location:
Lost in the K hole
Registered:
May 2002
|
|
Re: Flywheel sizes 7M and 2J
|
Thu, 08 January 2004 13:20
|
|
the 2jzge and 7mge use the same clutch, thus the pressue plate bolt and dowel holes, and the clutch disc surface dia (and step) are the same, but the flyweel centre hole, and the number of flywheel/crank bolts is different (6 vs  . also the total offset of the f/w face from the crank mounting fave is different by about 2mm.
|
|
|
I supported Toymods
Location:
Australia
Registered:
November 2003
|
|
Re: Flywheel sizes 7M and 2J
|
Fri, 09 January 2004 00:37
|
|
| ed_ma61 wrote on Thu, 08 January 2004 21:20 |
and the number of flywheel/crank bolts is different (6 vs .
|
I think Ed means ( 6 vs 8 ).
Damn smilies
|
|
|
Location:
Adelaide
Registered:
June 2003
|
|
Re: Flywheel sizes 7M and 2J
|
Fri, 09 January 2004 01:54
|
|
I thought there were two different flywheel sizes for the 7mgte
I had heared that there were, and that different clutches were required for each.
|
|
|
Location:
Brisbane
Registered:
May 2002
|
|
Re: Flywheel sizes 7M and 2J
|
Fri, 09 January 2004 02:59
|
|
The 7M-GE and 7M-GTE have different flywheel and clutch setups, however we're only discussing the 7M-GE in this thread.
|
|
|
