| Author | Topic |
|---|
Location:
Canberra
Registered:
May 2002
|
|
18R/RG to W5x supra 5 speed bellhousing
|
Mon, 12 January 2004 11:36
|
 |
Any interest in a bellhousing to suit an 18R/RG engine to supra W55/57/58 gearbox? I have one in canberra, but can freight via Aust Post to anywhere.
|
|
|
Location:
adelaide
Registered:
May 2002
|
|
Re: 18R/RG to W5x supra 5 speed bellhousing
|
Mon, 12 January 2004 14:34
|
|
I could be vaguely interested, i dont mind paying freight if i end up buying.. im in adelaide.
What sort of ballpark figures are you looking for for this bellhousing? Which starter motor was it made to suit? the stock 18R unit? also is it made for the standard flywheel setup etc.?
im not sure whether i will be using a supra box as of yet, but we'll see..
Cheers
_____________
blackRA28
|
|
|
Location:
Canberra
Registered:
May 2002
|
|
Re: 18R/RG to W5x supra 5 speed bellhousing
|
Wed, 14 January 2004 07:54
|
|
Its actually from a 21RC, I cant be 100% certain that they have the same starter motor as the 18RG.
I was thinking its not worth more than 50 bucks.
|
|
|
I supported Toymods
Location:
Oyster bay NSW
Registered:
May 2002
|
|
Re: 18R/RG to W5x supra 5 speed bellhousing
|
Thu, 15 January 2004 00:37
|
|
It takes the same starter motor, clutch fork, clutch slave, etc. Has it already had the location pin holes drilled out, one on each side to suit the 18r block?
$50 dollars is a good price too 
|
|
|
Location:
Canberra
Registered:
May 2002
|
|
Re: 18R/RG to W5x supra 5 speed bellhousing
|
Thu, 15 January 2004 06:43
|
|
|
Nope, I wasnt certain that all 18R's had the same size dowels, so i've left them at the smaller size. Buyer can decide what they need..
|
|
|
