| Author | Topic |
|---|
Location:
NSW
Registered:
September 2003
|
|
SC12's and SC14's
|
Wed, 14 January 2004 07:38
|
 |
|
Just after anyone's opinions. Is there a benefit of doing the conversion to fit an SC14 onto a 4AGZE. And how much is in the conversion. My SC12 is dead and I need to replace and it seems like that SC14's are cheaper and easier to come by.
|
|
|
Registered:
December 2003
|
|
Re: SC12's and SC14's
|
Wed, 14 January 2004 09:23
|
|
|
I fitted a Sc14 to a RWD 4agze .. It made 14psi on std pullies .. power/ torque wise it didn`t seem much different to a SC12 on 14psi .. But could have made a few more HP at a Guess .. I would fit a Turbo rather than using a sc14 as you make a lot more HP .. cheers Cam
|
|
|
Location:
NSW
Registered:
September 2003
|
|
Re: SC12's and SC14's
|
Wed, 14 January 2004 09:28
|
|
Thanks... not gonna bothr with the turbo conv on this car. It's a targa top AW11 and the Chassis flex is bad cause of no roof. Not worth pushing the power when chassis wont handle it. Gonna get a full hardtop SC AW11 for that... hehe... 
|
|
|
Registered:
November 2002
|
|
Re: SC12's and SC14's
|
Thu, 15 January 2004 06:52
|
|
The SC14 is bigger than the SC12, so it *should* push more air and therefore create a bit more power unless you have air volume restrictions downstream from the SC.
Mitch.
|
|
|
Location:
Castlemaine Vic
Registered:
November 2002
|
|
Re: SC12's and SC14's
|
Thu, 15 January 2004 08:15
|
|
|
talk to S.T.A.R maybe S.T.A.R.Z from these forums, hes in adelaide but may be able to shed some light on what your after.
|
|
|
Location:
sydney
Registered:
June 2003
|
|
Re: SC12's and SC14's
|
Thu, 15 January 2004 08:39
|
|
|
i used to run the sc14 on my gze .the conversion is well worth doing ,my setup made 125 rwkw
|
|
|
I supported Toymods
Location:
Perth, WA
Registered:
May 2003
|
|
|
