| Author | Topic |
|---|
Location:
Canberra
Registered:
May 2002
|
|
WTD: 4A-C Alternator
|
Mon, 19 January 2004 20:55
|
 |
Hi all,
I am searching for a RWD 4A-C Alternator to suit my AE86. Must be the type to take an external regulator.
Don't won't to spend too much as I am planning on selling the Sprinter shortly.
Any help would be greatly appreciated.
Regards
|
|
|
Location:
Menai area of Sydney
Registered:
June 2003
|
|
Re: WTD: 4A-C Alternator
|
Mon, 19 January 2004 21:24
|
|
|
Have a FWD 4AC alternator in Sydney. How do I tell if it's internal or external regulator ?
|
|
|
Location:
Melbourne
Registered:
October 2003
|
|
Re: WTD: 4A-C Alternator
|
Mon, 19 January 2004 21:51
|
|
|
should be a little attatchement on the rear of the alternator. The regulator should be able to be unscrewed.
|
|
|
Location:
Menai area of Sydney
Registered:
June 2003
|
|
Re: WTD: 4A-C Alternator
|
Mon, 19 January 2004 22:01
|
|
|
I'll have a look this evening and take a picture if that helps.
|
|
|
Location:
qld
Registered:
December 2003
|
|
Re: WTD: 4A-C Alternator
|
Tue, 20 January 2004 01:33
|
|
|
ive got one from a sprinter, but im in qld. pm me if you get desperate, its just sitting, i dont want f' all for it.
|
|
|
I supported Toymods
Location:
Perth, Western Australia
Registered:
December 2002
|
|
Re: WTD: 4A-C Alternator
|
Tue, 20 January 2004 02:05
|
|
| T APLUS 22 wrote on Tue, 20 January 2004 05:51 |
should be a little attatchement on the rear of the alternator. The regulator should be able to be unscrewed.
|
That will only apply if he has an aftermarket alternator like a Bosch. The original ones are Nippondenso's and will be labelled either internally or externally regulated - their voltage regulator cannot be removed without opening the casing. I have a few kicking around too if you need one
|
|
|
Location:
Menai area of Sydney
Registered:
June 2003
|
|
Re: WTD: 4A-C Alternator
|
Tue, 20 January 2004 11:08
|
|
|
Mine's a Bosch and has a black piece (about the size of a thin matchbox) held on by two screws. Painted silver rather than bare aluminium so might be a reco'.
|
|
|
