| Author | Topic |
|---|
Location:
Campbelltown, NSW, Austra...
Registered:
January 2004
|
|
Extractor 3s-fe/3s-ge
|
Tue, 03 February 2004 10:39
|
 |
Hey, quick question.
If i get extractors for my Camry's 3S-FE engine, and later on down the track decide to get a 3S-GE engine put in or change cars to a Celica ST-162, would i be able to replace the original manifold, with the 3s-fe extractors, or are the manifolds different?
|
|
|
Registered:
May 2002
|
|
Re: Extractor 3s-fe/3s-ge
|
Tue, 03 February 2004 12:15
|
|
|
well ive read somewhere that the stock manifolds are interchangeable so one can assume the extractors would be....this is going off second hand information tho so id try to get it confirmed
|
|
|
Location:
Canberra
Registered:
April 2003
|
|
Re: Extractor 3s-fe/3s-ge
|
Tue, 03 February 2004 14:18
|
|
|
thats true man you can the extracors I had on my 3SGE celica were also the same ones listed for the 3SFE engine. actually thats the opposite way around, they were listed for the 3SFE but fitted my 3SGE, cause there were none listed for the 3SGE.
|
|
|
Location:
Campbelltown, NSW, Austra...
Registered:
January 2004
|
|
Re: Extractor 3s-fe/3s-ge
|
Wed, 04 February 2004 06:26
|
|
Thats great, if i decide to get extractors, that means i don't have to sell the car with them.
Are they hard to fit? or is it best to get them professionaly done?
|
|
|
Location:
Epping, Sydney
Registered:
April 2003
|
|
Re: Extractor 3s-fe/3s-ge
|
Wed, 04 February 2004 06:28
|
|
get them done if you can't weld yourself I reckon.
the top section bolts on, but the bottom section is just plain metal tube usually and needs to be welded
|
|
|
Location:
Campbelltown, NSW, Austra...
Registered:
January 2004
|
|
Re: Extractor 3s-fe/3s-ge
|
Wed, 04 February 2004 06:30
|
|
|
I can weld, but i only have a crappy stick welder, so i would probably get it done, and if i end up selling the camry they shouldn't be too hard to remove right?
|
|
|
Location:
Epping, Sydney
Registered:
April 2003
|
|
Re: Extractor 3s-fe/3s-ge
|
Wed, 04 February 2004 06:39
|
|
hey dude it cost me $100 for installation + a few beers to thank them for the quality last minute job -> these dudes in Ulverstone (who I don't know at all - Precision Exhaust or something we so nice to me
so anyway, in Sydney if you get a quote near that you should be pretty happy I reckon ay
|
|
|
Location:
Campbelltown, NSW, Austra...
Registered:
January 2004
|
|
Re: Extractor 3s-fe/3s-ge
|
Wed, 04 February 2004 06:41
|
|
Yeah...
How much for parts?
|
|
|
Location:
Epping, Sydney
Registered:
April 2003
|
|
Re: Extractor 3s-fe/3s-ge
|
Wed, 04 February 2004 06:42
|
|
|
$300 for mah Berkleys, Genies go for about $400 I think...
|
|
|
Location:
Campbelltown, NSW, Austra...
Registered:
January 2004
|
|
Re: Extractor 3s-fe/3s-ge
|
Wed, 04 February 2004 06:43
|
|
|
Thats not bad.
|
|
|
Location:
Canberra
Registered:
April 2003
|
|
Re: Extractor 3s-fe/3s-ge
|
Wed, 04 February 2004 07:06
|
|
|
the genies cost me $350, plus yeah the $100 bucks installation.
|
|
|
Location:
Colac, Victoria
Registered:
May 2002
|
|
Re: Extractor 3s-fe/3s-ge
|
Wed, 04 February 2004 08:57
|
|
hehe - want to know how much a set of extractors to suit a 3sgte ( with turbo adaptor costs ) in stainless steel pipe + hpc coated ?
wait for it ...
900 dollars ! HEHEHE! mucho $bling$
Thaths the quote i got form aussie to match up a set to the rest of my exhaust setup ..
Mind you they say - oh a 25 % ish increase in powahs is on the cars 
|
|
|
Location:
Campbelltown, NSW, Austra...
Registered:
January 2004
|
|
Re: Extractor 3s-fe/3s-ge
|
Wed, 04 February 2004 09:40
|
|
|
Cool
|
|
|
Location:
Glossodia,NSW
Registered:
May 2002
|
|
Re: Extractor 3s-fe/3s-ge
|
Wed, 04 February 2004 09:43
|
|
|
3sge extractors are hard to find,i've got an sw20 mr2 with a 3sge in it and not one company makes a specific set for mr2's.After some time i finally realised (stupid me)that the early celicas use the 3sge engine and are fwd with east/west mount engine.The mr2 is rwd but still is an east/west mount engine and my exhaust shop had a set of genies for a celica and since they are the same motor they mounted up.It cost me $618 and a fullday to do it.So it wasn't cheap.But the car sounds awesome and they look cool.Only downside is the oil filter is water cooled on the mr2 whereas the celicas are not.so in order to change the oil filter you must undo the extractors.bit of a bugger.
|
|
|
Location:
Colac, Victoria
Registered:
May 2002
|
|
Re: Extractor 3s-fe/3s-ge
|
Wed, 04 February 2004 09:50
|
|
just notiiced my typo
25 Hp or KW i think was the figure quoted. Geez i cant remember - my brains fried
|
|
|
Location:
Sydney
Registered:
September 2003
|
|
|
Location:
Castle Hill, Sydney
Registered:
January 2003
|
|
Re: Extractor 3s-fe/3s-ge
|
Thu, 05 February 2004 01:57
|
|
|
hey rob any recommendations of where to get extractors in sydney?
|
|
|
Location:
Epping, Sydney
Registered:
April 2003
|
|
Re: Extractor 3s-fe/3s-ge
|
Thu, 05 February 2004 02:03
|
|
nah man sorry  I did all my research in tassie while I was there.
I would call Parramatta Exhaust as he has always been a good price and excellent service though if I was looking.
|
|
|
.