| Author | Topic |
|---|
Registered:
August 2003
|
|
2tgue solex
|
Thu, 05 February 2004 09:31
|
 |
Wanted information and carbies & manifold
I have the motor which was running webers, which i dont have and do not want to go to EFI.
|
|
|
Location:
nth ringwood, Victoria
Registered:
August 2002
|
|
Re: 2tgue solex
|
Thu, 05 February 2004 11:09
|
|
|
i have some 18rg 1s which will fit and they have solex ram tubes as well on them
|
|
|
Registered:
August 2003
|
|
Re: 2tgue solex
|
Fri, 06 February 2004 00:33
|
|
|
Is the manifold compatable to bolt on, I have got a hold of a twin weber manifold that i believe has the same stud pattern as a solex? How much for the carbs & manifold?
|
|
|
Location:
nth ringwood, Victoria
Registered:
August 2002
|
|
Re: 2tgue solex
|
Fri, 06 February 2004 06:33
|
|
|
yes i wont 250 for the carbies and manifold with the ran tubes
|
|
|
Location:
brisbane
Registered:
July 2003
|
|
Re: 2tgue solex
|
Fri, 06 February 2004 06:53
|
|
|
i think the 18rg carbs are 44mm and 2tg's have 40mm. i have a set of 40mm solexes that u can have for $80 if u don't want the 18rg ones. these will bolt onto the webber manifold.
|
|
|
Registered:
August 2003
|
|
Re: 2tgue solex
|
Mon, 09 February 2004 10:54
|
|
|
Sounds good, what condition are the carbs and how do we sort the exchange. Im in Sydney
|
|
|
Forum Sponsor
Location:
Shepparton (Vic)
Registered:
May 2002
|
|
Re: 2tgue solex
|
Tue, 10 February 2004 21:13
|
|
|
To the best of my knowledge 18RG carbs and 2TG carbs are 40mm. An 18RG m/f wont fit a 2TG. And now for the sales pitch. I have a pr from a 2tg with a m/f. They came on an import engine so I cant say how good they are. They look clean and are not knocked around. $250 + freight. e mail me if you want photos
|
|
|
