| Author | Topic |
|---|
Location:
Brisbane
Registered:
February 2003
|
|
RA40 - 18R turbo+spares+1G-GTE! (Qld) - $6300
|
Wed, 11 February 2004 14:02
|
 |
i want to move to an MA61 so the red beast has to go... i'll arrange a safety certificate (needs tyres & windscreen) if i get a deposit on a sale. I'm also selling the 1G-GTE that was going to replace the 18R-T one day plus spares.
RA40 Red, 1981, Hatch, 5sp, Air-con, 18R (turbo)
on the road since April 2002 after 2 year rebuild, Qld registered with compliance plate for the turbo.
NEW PRICE: $6300 OBO for the car, the 1G-GTE and spares. I will split but only into large lots (e.g. $1k for the all the 1G-GTE stuff, $5K for celica, $300 for the spares).
I've changed the detail above slightly and I've moved all the descriptive crap over to my web site:
<http://members.optushome.com.au/mkhala/red_celica/ stuff_for_sale.html>
so i can show this pic:
[Updated on: Mon, 01 March 2004 13:18]
|
|
|
Location:
c'town, NSW
Registered:
May 2002
|
|
Re: RA40 - 18R turbo + spares and 1G-GTE! (QLD)
|
Wed, 11 February 2004 23:29
|
|
how many bolts on the 1 inch master cylinder?
is it a 2 bolt or a 4 bolt?
and how much do u want for it?
|
|
|
Location:
Brisbane
Registered:
February 2003
|
|
Re: RA40 - 18R turbo + spares and 1G-GTE! (QLD)
|
Thu, 12 February 2004 12:30
|
|
| rob_RA40 wrote on Thu, 12 February 2004 09:29 |
how many bolts on the 1 inch master cylinder?
is it a 2 bolt or a 4 bolt?
|
hi rob_ra40,
possible error in my measurements - I/D measured 1" (25mm) when i looked inside it at blake's but markings on cylinder casting differ:
engine side: 83 - AISIN
fender side: 15/16 - 52
is a 4 bolt unit with bias adjuster attached to booster underneath the master cylinder
booster has this part number sticker on it:
814-02501
3822
sorry about that - will ammend specs above also.
am not sure what it would have cost - $30-40? there was bugger-all leakage at the rear when we unbolted it from the booster.
charles.
|
|
|
Location:
c'town, NSW
Registered:
May 2002
|
|
Re: RA40 - 18R turbo + spares and 1G-GTE! (QLD)
|
Thu, 12 February 2004 22:22
|
|
thanks for the info
it seems us RA40 owners are a but stuck when finding a 2 bolt master cylinder upgrade.
i think i might just get mine bored.
thanks anyway.
|
|
|
Location:
Brisbane
Registered:
February 2003
|
|
Re: RA40 - 18R turbo + spares and 1G-GTE! (QLD)
|
Tue, 17 February 2004 13:21
|
|
|
bump ... surely there's an enthusiast for these machines out there ...
|
|
|
Location:
Brisbane
Registered:
February 2003
|
|
Re: RA40 - 18R turbo + spares and 1G-GTE! (QLD)
|
Mon, 01 March 2004 13:21
|
|
|
kerbump?
|
|
|
Location:
Brisbane
Registered:
July 2002
|
|
Re: RA40 - 18R turbo+spares+1G-GTE! (Qld) - $6300
|
Wed, 03 March 2004 09:56
|
|
1g gte for a grand.. that the full engine package?
i know i know what u have... but i dont know how ur selling it
|
|
|
Location:
Brisbane
Registered:
February 2003
|
|
Re: RA40 - 18R turbo+spares+1G-GTE! (Qld) - $6300
|
Wed, 03 March 2004 13:25
|
|
hi Jag7799,
is engine+box+some wiring - there's no outboard gear like power steering, aircond, radiator or thermo fans, fuse box - but it does have exhaust, tailshaft and fuel pump.
the engine is separated from the gearbox. you+me could lift everything except engine onto a ute without using a crane or ramp. Bring an old skateboard and some kind of flat ramp and we could wheel the engine on/off a ute.
the intake plumbing is pulled apart and sitting in boxes as i was considering a partial pull-down (e.g. to a short block) to check condition of internals.
the electrical leads/head-plugs for all sensors are bagged and labeled and live in another box.
the rest of the loom was hacked up or used forspares and lives in a plastic bag.
unless you can rewire engine & gearbox ECUs, or are considering megsquirt or another aftermarket ECU as well as KDog's tiptronic gearbox controller, it might be difficult to get it running.
as i told Matt on the w'end, i could help with re-assembly and wiring up if your keen.
even tho it hurts my sale prospects, you'll need to take some time and planning if you want it - it's a fair bit of work in anyone's books.
|
|
|
Location:
Brisbane
Registered:
July 2002
|
|
Re: RA40 - 18R turbo+spares+1G-GTE! (Qld) - $6300
|
Wed, 03 March 2004 23:07
|
|
wankers turned down my loan for 8.5 so no go there
had to reapply for lesser ammount
|
|
|
Location:
Brisbane
Registered:
February 2003
|
|
Re: RA40 - 18R turbo+spares+1G-GTE! (Qld) - $6300
|
Thu, 01 April 2004 04:05
|
|
if you're interested, this car will be at the Toyota Nationals - not in the drags, but if I can remove the bugsplatter from the drive down, it'll be in the show-n-shine.
Also, i'm re-assembling the 1G engine so the induction is intact.
ta, charles.
|
|
|
Location:
Rocklea qld
Registered:
February 2003
|
|
Re: RA40 - 18R turbo+spares+1G-GTE! (Qld) - $6300
|
Fri, 02 April 2004 10:47
|
|
|
Free bump for ya. Cant believe no-one wants it. Would anyone be interested if it was fuel injected. I think its time to build it charles. Also my boss wants that turbo u have for our diesel urvan if you still interested in selling it.
|
|
|
Location:
Melbourne
Registered:
May 2002
|
|
Re: RA40 - 18R turbo+spares+1G-GTE! (Qld) - $6300
|
Sun, 04 April 2004 16:29
|
|
Good luck Unfortunatly A4 series is loved by few... try owning an MA45 
Allan
|
|
|
