| Author | Topic |
|---|
I supported Toymods
Location:
Australia
Registered:
November 2003
|
|
1UZ Oil Filter Relocation
|
Tue, 17 February 2004 05:20
|
 |
As title states, I need the one from the front of the motor, not the one mounted at the back of the motor
Very Desperate
Know anyone/where that has one?
|
|
|
Location:
Melbourne
Registered:
May 2002
|
|
Re: 1UZ Oil Filter Relocation
|
Thu, 19 February 2004 09:05
|
|
what about an aftermarket adaptor block? I use one on my rally car to move the filter from under the throttle bodies. It also allows me to run an oil cooler without any drama's. I realise that it is unlikely that a 1uz will require an oil cooler, but you can never be too sure. I purchased my filter adaptor at the local rally supply shop, Autosport, and then got the hoses made at Pirtek. Cost me about $450 including a $200 cooler. Well worth the extra effort, it also allows you to put the filter in a more convienent locaion for servicing. The resulting loss in oil pressure was combated by shimming the oil pressure relief valve, however this is not going to be a problem in a 1uz. If you do go down this path, be sure to increase you oil volume by the total volume of the system.
good luck
Mal
|
|
|
I supported Toymods
Location:
Australia
Registered:
November 2003
|
|
Re: 1UZ Oil Filter Relocation
|
Thu, 19 February 2004 09:10
|
|
Thanks dude, but got it covered
Got custom modification done at ENZED
|
|
|
I supported Toymods
Location:
Perth, Western Australia
Registered:
December 2002
|
|
Re: 1UZ Oil Filter Relocation
|
Thu, 19 February 2004 09:58
|
|
|
Yep, I love JAMC fittings!
|
|
|
