Location: Redbank Plains,near Ipswi...
Registered: May 2002
cash waiting for these 4AG/Sprinter/TRD parts
Thu, 19 February 2004 23:08
1) pair of 45 or 48mm webers. dont want solex! dont need manifold but will consider a set with one
2) rear sway bar. 15mm or larger diameter with correct mounts
3) blue dash. not split or otherwise stuffed.
4) TRD or equivalent quick shift kit for T50. can repair a broken one
5) T50 gearbox. sad or otherwise cheap for a few bits only. must be in brissy
6) multi-groove water pump pully, larger than 110mm diameter
7) TRD engine and gearbox mounts. new or used. 15 x 6.5 or 7" "wire mesh" design alloys. prefer 2 or 3 piece bolted together types, eg BBS, Advan, Impul etc. will consider a pair. need photos. must be rear drive type 4 x 114pcd
Terry
for the multi-groove water pump pully, try a 2Y hilux motor, that is what I used along with the alternator pully and crank shaft on my super charger conversion on a 18RGUE.
Thu, 19 February 2004 23:08
15 x 6.5 or 7" "wire mesh" design alloys. prefer 2 or 3 piece bolted together types, eg BBS, Advan, Impul etc. will consider a pair. need photos. must be rear drive type 4 x 114pcd
