Toymods Car Club Inc: Tech & Conversions => no clutch feel or engaement (hydraulic)

Toymods Car Club
www.toymods.org.au

Toymods » Tech & Conversions » no clutch feel or engaement (hydraulic) Show: Today's Posts :: Show Polls Email to friend

Author

Topic

tanman
Forums Junkie

Location:
Newcastle
Registered:
May 2002

no clutch feel or engaement (hydraulic)	Tue, 24 February 2004 10:03

The clutch was working fine on the weekend. I broke a driveshaft on saturday, so the car hasn't driven since saturday. So I put the new shaft in today and went to test drive it. The pedal has no feel and the clutch is not engaging. The clutch fluid level is fine. Where do I go from here? [Report message to a moderator]

TurboRA28
Forums Junkie

Location:
Terrigal
Registered:
May 2002

Re: no clutch feel or engaement (hydraulic)	Tue, 24 February 2004 10:32

Maybe there is air in the system? Or i just last weekend had the situation where the clutch fork managed to unclip itself and come off the carrier bearing. Get under the car, have a mate press the clutch in and out and watch the slave cylinder and fork and see if it's moving or not. If the slave isn't moving probably air in the system or crappy master cylinder. if the slave is moving and pushing the fork, maybe the clutch diaphram has collasped. Just some ideas... Joel [Report message to a moderator]

Location:
Western Sydney (NSW)
Registered:
March 2003

Re: no clutch feel or engaement (hydraulic)	Mon, 01 March 2004 00:01

I had the same thing happen 2 me. I got a brand new racing clutch thinking that was the prob... But it was a broken spring in my slave cylinder [Report message to a moderator]

Previous Topic:	Supra ideas......
Next Topic:	4 speed to 5 speed gearbox conversion?

Current Time: Sun Jan 19 14:25:14 UTC 2025

Total time taken to generate the page: 0.0059549808502197 seconds

.:: Contact :: Home ::.