| Author | Topic |
|---|
Location:
Eastern Sydney
Registered:
May 2002
|
|
RX7 FC3S 4 pot callipers for sale
|
Sun, 07 March 2004 20:42
|
 |
I have a pair of 4pot alloy callipers from the front of an FC3S (series 5) RX7 for sale.
these run a 280x20mm disc standard,and are a perfect upgrade for sprinters.
I'm selling the callipers only,no discs or mounting brackets.
parts are in Sydney but can ship interstate at the buyer's expense.
asking $400 for the pair.
regards,
Justin...
0418 663628
|
|
|
Location:
Blue mtns
Registered:
November 2003
|
|
Re: RX7 FC3S 4 pot callipers for sale
|
Tue, 09 March 2004 00:29
|
|
i don't suppose you know if they will slip straight on, or if you need to fiddle around and mod anything to make it fit?
|
|
|
I supported Toymods
Banned User
Location:
Brisbane
Registered:
May 2002
|
|
Re: RX7 FC3S 4 pot callipers for sale
|
Tue, 09 March 2004 03:38
|
|
|
Slip straight on to what? A mazda RX7?
|
|
|
Location:
Eastern Sydney
Registered:
May 2002
|
|
Re: RX7 FC3S 4 pot callipers for sale
|
Tue, 09 March 2004 06:20
|
|
Thanks for that cool1,that's just what I thought.
naturally,putting a calliper from another car is going to be a custom job.
series 5 rx7 callipers are a common fitment to early dattos and sprinters,as they fit inside a 15" wheel,and are quite light (they actually weigh less than the std single pot sprinter callipers).
you'll need to make up custom mounting brackets to bolt to the struts,get some custom flexible hoses made up,and to modify an appropriate disc to bolt to the hub.
it's not a difficult job really.
there's nothing that bolts straight onto sprinter struts other than the std oz-spec callipers and the JDM vented callipers.
I originally bought these to fit to my sprinter,but the project has been shelved for a while.
Justin...
|
|
|
I supported Toymods
Banned User
Location:
Brisbane
Registered:
May 2002
|
|
Re: RX7 FC3S 4 pot callipers for sale
|
Wed, 10 March 2004 08:03
|
|
Are you able to get me a measurement for me? I would like to know how fat the outer pistons are. So basicly I just want to know how far the caliper sits out from the rotor.
Thanks
|
|
|
