Toymods Car Club Inc: Tech & Conversions => 2tg solex manifold and webbers

Toymods Car Club
www.toymods.org.au

Toymods » Tech & Conversions » 2tg solex manifold and webbers Show: Today's Posts :: Show Polls Email to friend

Author

Topic

ta2272
Forums Junkie

Location:
qld
Registered:
May 2003

2tg solex manifold and webbers	Thu, 11 March 2004 09:58

just wondering if i got my hands on some webbes 45mm twin sidedraft would they bolt up to my 2tg solex manifold. jason [Report message to a moderator]

CelicaRA45
Forums Junkie

Location:
nth ringwood, Victoria
Registered:
August 2002

Re: 2tg solex manifold and webbers	Thu, 11 March 2004 10:02

yes will have 2 open up the inlet a little thou [Report message to a moderator]

Norbie
Forums Junkie

Location:
Brisbane
Registered:
May 2002

Re: 2tg solex manifold and webbers	Thu, 11 March 2004 23:45

The 2T-G manifold has a DCOE bolt pattern so you can use any DCOE sidedraught carb, including Weber, Solex, Delorto and probably others. [Report message to a moderator]

Registered:
May 2002

Re: 2tg solex manifold and webbers_45mm - 48mm???	Fri, 12 March 2004 23:34

Did Toyota make different size manifolds for their 45mm and 48mm applications? FYI: I managed to have a 50mm EFI setup match ported to the original 40mm manifold. Most of the porting was done on the "harden plastic spacer" cause the water jackets (not sure on their specific name) in the manifold are too close to the runners. Turned out very nice! Frank [Report message to a moderator]

Previous Topic:	selecting pistons for a 3tg hybrid
Next Topic:	Mazda RX7 series 5 year model?

Current Time: Sun Oct 20 23:53:02 UTC 2024

Total time taken to generate the page: 0.0084011554718018 seconds

.:: Contact :: Home ::.