| Author | Topic |
|---|
Location:
brisbane
Registered:
March 2004
|
|
URGENT 18rg engine mounts
|
Sun, 14 March 2004 23:33
|
 |
hello,
i need a pair of engine mounts to suit an 18rg i need the centre type not the ones that sit to the rear of the motor
|
|
|
Location:
nth ringwood, Victoria
Registered:
August 2002
|
|
Re: URGENT 18rg engine mounts
|
Mon, 15 March 2004 05:20
|
|
|
need pics
|
|
|
Location:
Rocklea qld
Registered:
February 2003
|
|
Re: URGENT 18rg engine mounts
|
Mon, 15 March 2004 10:40
|
|
|
Mounts on the rear of the engine??? never even knew there was a such thing for that engine. They are the same mounts as a 18rc and i also this 2-s engines share the same mounts as well as alot of others around that era.
|
|
|
I supported Toymods
Location:
Perth, Western Australia
Registered:
December 2002
|
|
Re: URGENT 18rg engine mounts
|
Mon, 15 March 2004 11:39
|
|
I have rubber mounts available, PM me if you're interested?!
Clint
|
|
|
Location:
brisbane
Registered:
March 2004
|
|
Re: URGENT 18rg engine mounts
|
Mon, 15 March 2004 23:46
|
|
im talking about the brackets that connect to the motor not the rubber
they ones i have sit towards the very rear of the motor and i need ones that measure 280mm from the centre hole of the bracket to the flex plate that connects to the bellhousing
|
|
|
Location:
Gold Coast
Registered:
October 2002
|
|
Re: URGENT 18rg engine mounts
|
Tue, 16 March 2004 08:58
|
|
|
what celica is it going into?
|
|
|
Location:
brisbane
Registered:
February 2004
|
|
Re: URGENT 18rg engine mounts
|
Tue, 16 March 2004 12:11
|
|
|
Think you might be after the ones that bolt up to the gearbox and also to the block if so they arent essential so you can get away without them
|
|
|
Location:
brisbane
Registered:
March 2004
|
|
Re: URGENT 18rg engine mounts
|
Wed, 17 March 2004 01:12
|
|
dudes,
this 18rg came oout of an ra40, the only mounts on this are the ones the bolt to the crossmember to support the engine from falling out of the car
i want to put this into an ra65 celica and need the engine to sit further back than where it would be if i used the existing mounts
cheers
gus
|
|
|
