| Author | Topic |
|---|
I supported Toymods
Location:
Australia
Registered:
November 2003
|
|
EOI: UZX73 Engine Mounts
|
Thu, 25 March 2004 03:07
|
 |
Hey Guys
I will probably be taking my engine out in a few weeks to redo the engine mounts, and put them on a better angle.
What I'm thinking, is I can give my mounts to a metal shop, and they can make copies of them for me.
Would anyone be interested in some?
Estimate on cost I have no idea.
At a guess, the first set will cost about $400-$500 to get made, but each subsequent set will prolly only cost $50.
So at a guess, each set will cost about $100, but it will make the 1UZ a straight bolt in.
They may work for the MX83, but the disclaimer is, I can't guarentee.
Interest?
Feel free to post this around anywhere.
I can ship to anywhere in the world (I'm guessing there will be a want in America)
I can be contacted here or via PM
(Net Nazi, if you feel that this is a commercial post (which it isn't), feel free to contact me
If there is a huge interest, I can definately give a kickback to Toymods)
[Updated on: Wed, 20 October 2004 00:34]
|
|
|
Location:
Perth
Registered:
August 2003
|
|
Re: EOI: UZX73 Engine Mounts
|
Thu, 25 March 2004 15:33
|
|
|
hey just a question how to you tell the welders the measurements that you want the mounts to be eg. i want a 1g in my corona, how do you measure it???
|
|
|
I supported Toymods
Location:
Australia
Registered:
November 2003
|
|
Re: EOI: UZX73 Engine Mounts
|
Thu, 25 March 2004 15:36
|
|
Hours of test fitting and fiddling about.
Basically, make part of the mount up, bolt it to the motor, put the motor in, see how far away you are, take it out, modify mount, put back in, test again etc etc etc
Many hours
|
|
|
