| Author | Topic |
|---|
Location:
Adelaide
Registered:
September 2003
|
|
|
Registered:
August 2002
|
|
Re: Yet ANOTHER shed clearance (MA61/18R-G/Stigma)
|
Mon, 29 March 2004 03:40
 
|
 |
|
Size and colour of the gauge?
|
|
|
Location:
Adelaide
Registered:
September 2003
|
|
|
Registered:
August 2002
|
|
Re: Yet ANOTHER shed clearance (MA61/18R-G/Stigma)
|
Mon, 29 March 2004 05:38
|
|
ifli4u@yahoo.com 
|
|
|
Location:
Adelaide
Registered:
September 2003
|
|
Re: Yet ANOTHER shed clearance (MA61/18R-G/Stigma)
|
Mon, 29 March 2004 05:54
|
|
Done, piccy on it's way
Cheers
MB
|
|
|
Location:
Adelaide
Registered:
September 2003
|
|
Re: Yet ANOTHER shed clearance (MA61/18R-G/Stigma)
|
Mon, 29 March 2004 22:00
|
|
Bump.
More SW20 parts added
|
|
|
Registered:
November 2002
|
|
Re: Yet ANOTHER shed clearance (MA61/18R-G/Stigma)
|
Tue, 30 March 2004 03:33
|
|
Michael,
Stand by for a PM mate, hopefully it won't insult you !
Cheers,
Mitch.
|
|
|
Location:
Adelaide
Registered:
September 2003
|
|
Re: Yet ANOTHER shed clearance (MA61/18R-G/Stigma)
|
Tue, 30 March 2004 05:04
|
|
Bump, and now MA61 Rear pads sold
Cheers
Michael B
|
|
|
Location:
Redbank Plains,near Ipswi...
Registered:
May 2002
|
|
Re: Yet ANOTHER shed clearance (MA61/18R-G/Stigma/SW20)
|
Tue, 30 March 2004 06:52
|
|
|
I'll give you $115 including post for the set of 3 MR2 mounts
|
|
|
Location:
Sydney
Registered:
September 2003
|
|
Re: Yet ANOTHER shed clearance (MA61/18R-G/Stigma/SW20)
|
Tue, 30 March 2004 08:29
|
|
|
have u got a speedo cable for a mr2 sw20?
|
|
|
Location:
Adelaide
Registered:
September 2003
|
|
Re: Yet ANOTHER shed clearance (MA61/18R-G/Stigma/SW20)
|
Tue, 30 March 2004 21:53
|
|
Terry, you have a PM
4DPIGZ - sorry, but no.
|
|
|
Location:
Adelaide
Registered:
September 2003
|
|
Re: Yet ANOTHER shed clearance (MA61/18R-G/Stigma/SW20)
|
Thu, 01 April 2004 00:32
|
|
bump again.
TRD Mounts now sold.
|
|
|
Location:
Adelaide
Registered:
September 2003
|
|
|
Location:
Adelaide, SA
Registered:
May 2002
|
|
Re: Yet ANOTHER shed clearance (MA61/18R-G/Stigma/SW20)
|
Mon, 05 April 2004 03:09
|
|
9. MA61 F&R Paedders "Comfort Gas" shocks (removed to upgrade to Koni Yellows - apparently only 12 months old) - $50 set
What are these like? Are they any good? I'm looking for some shocks for my GA61 to tide me over until I can afford some real suspension 
|
|
|
Location:
Adelaide
Registered:
September 2003
|
|
Re: Yet ANOTHER shed clearance (MA61/18R-G/Stigma/SW20)
|
Mon, 05 April 2004 03:19
|
|
They rode OK in the car with std springs.
They'll definitely do as an interim until you can afford decent ones like I did.
Let me know if you want them and they are yours.
Just note the postage costs depending where you are
Cheers
Michael B
|
|
|
Location:
Adelaide, SA
Registered:
May 2002
|
|
Re: Yet ANOTHER shed clearance (MA61/18R-G/Stigma/SW20)
|
Mon, 05 April 2004 04:18
|
|
I'll take them for $50... but I'll have to pick them up this weekend, i dont get paid until thursday.
What suburb are you in (need an idea of where i'm going to plan ahead)
Thanks
|
|
|
Location:
Adelaide
Registered:
September 2003
|
|
Re: Yet ANOTHER shed clearance (MA61/18R-G/Stigma/SW20)
|
Mon, 05 April 2004 05:21
|
|
|
You have a PM
|
|
|
Location:
Adelaide
Registered:
September 2003
|
|
Re: Yet ANOTHER shed clearance (MA61/18R-G/Stigma/SW20)
|
Mon, 24 May 2004 17:50
|
|
|
Back up to the top we gooooooooooooooooooooooo
|
|
|
Location:
Brisbane
Registered:
May 2002
|
|
Re: Yet ANOTHER shed clearance (MA61/18R-G/Stigma/SW20)
|
Tue, 25 May 2004 00:06
|
|
What size is the 7mge flywheel (225, 236, 240?), and how much were you chasing?
Cheers
Wilbo
|
|
|
Location:
Adelaide
Registered:
September 2003
|
|
Re: Yet ANOTHER shed clearance (MA61/18R-G/Stigma/SW20)
|
Tue, 25 May 2004 00:22
|
|
Here is the info that I dug up from an old post.
Clutch plate : 9.25" OD x 5.875" ID
Press. Plate : 9.375" OD x 5.75" ID
Flywheel : 9.5" OD x 5.3125" ID & 8 - 8.5kg (friction face data)
It appears that the flywheel that I have is the 240mm type and it was from a 7M-GE MA70 (ex lumpy from these forums).
Also have the following clutch plate as well
New Exedy clutch plate with 10" OD and 6.625" ID (full face organic - don't know if it will fit anything or not ?)
Price, postage/freight will be a killer, but actual value will be $25 ?
Cheers
Michael B
|
|
|
Location:
Brisbane
Registered:
May 2002
|
|
Re: Yet ANOTHER shed clearance (MA61/18R-G/Stigma/SW20)
|
Tue, 25 May 2004 01:32
|
|
$25 plus post? if so SOLD!
I'll send you a PM, to get some details...
Cheers
Wilbo
|
|
|
Location:
Adelaide, SA
Registered:
May 2002
|
|
Re: Yet ANOTHER shed clearance (MA61/18R-G/Stigma/SW20)
|
Tue, 25 May 2004 03:19
|
|
bbaacchhyy, I was poking around my brakes the other day, and discovered that one of the bolts on the front right (i think) caliper had snapped off  it's stuck in there for good now.
I believe my car has the same calipers as the MA61 though.
I'm gonna contact toyota about a replacement bolt for that caliper, and see if I can get a rebuild kit for both fronts too... dunno if I can remove the bolt though!
How much for one or two calipers?
|
|
|
Location:
Perth, WA
Registered:
September 2003
|
|
Re: Yet ANOTHER shed clearance (MA61/18R-G/Stigma/SW20)
|
Tue, 25 May 2004 04:26
|
|
Michael B - I'll actually be interested in the Sigma Boss kit for my brothers car. What year is a GK tho? He has a 1980 Siggy - will it fit that? I'll give ya $40 if you pay for the postage to Perth! 
Further.. the Bell housing? Would this be a certain part I would need if I were to be conecting up a 5spd to my 7M in the Mk2???! (others are welcome to shed some light on this one too) If so I could be interested in the bell housing too.
Let me know mate
Cheers
Damo
TRD 83
|
|
|
Location:
Brisbane
Registered:
May 2002
|
|
|
Registered:
August 2002
|
|
Re: Yet ANOTHER shed clearance (MA61/18R-G/Stigma/SW20)
|
Tue, 25 May 2004 08:14
|
|
i will take the steering rack for $50 michael.
|
|
|
Location:
Adelaide
Registered:
September 2003
|
|
Re: Yet ANOTHER shed clearance (MA61/18R-G/Stigma/SW20)
|
Tue, 25 May 2004 14:40
|
|
Wilbo666 : Have replied to the PM. Yes I have a clutch plate & std PP as well
People100 : Have PM'd you back re Tensioner
Hydra : Probably the same brake, not sure. $25 per caliper - prefer to sell as a pair
WA TRD 83 : GK was about 1986, but I don't know if there were any changes for the earlier ones. The boss kit is No. 6101, and is the boss only - no horn button. As a goodwill gesture, to aid wit uncertainty, I'll take $35 incl postage.
The bellhousing will fit btween the 7M and and a W55/57/58/59 - just as I have done on mine. Postage would probably be about $25 or so, don't know the weight yet.
BlackSupra : No worries, offer accepted. The postage to get the reco one I bought from Newcastle was $18.50, so we can assume the same to Sydney ? Round it to $65, and you have a deal.
People100, WA TRD 83, & BlackSupra, if you are happy with that, PM me and I'll send you the bank details and I'll get them all away
Cheers
Michael B
|
|
|
Location:
Adelaide
Registered:
September 2003
|
|
Re: Yet ANOTHER shed clearance (MA61/18R-G/Stigma/SW20)
|
Wed, 26 May 2004 15:19
|
|
|
Back to the top with edits
|
|
|
Location:
Adelaide, SA
Registered:
May 2002
|
|
Re: Yet ANOTHER shed clearance (MA61/18R-G/Stigma/SW20)
|
Thu, 27 May 2004 00:47
|
|
|
bbaacchhyy, if those calipers aren't sold in a weeks time, i'll take them both
|
|
|
Location:
Adelaide
Registered:
September 2003
|
|
Re: Yet ANOTHER shed clearance (MA61/18R-G/Stigma/SW20)
|
Thu, 27 May 2004 00:51
|
|
No probs, I'll hold them for you.
Cheers
Michael B
|
|
|
Location:
Adelaide
Registered:
September 2003
|
|
Re: Yet ANOTHER shed clearance (MA61/18R-G/Stigma/SW20)
|
Thu, 27 May 2004 23:42
|
|
|
upsedaisy
|
|
|
Location:
Adelaide
Registered:
September 2003
|
|
Re: Yet ANOTHER shed clearance (MA61/18R-G/Stigma/SW20)
|
Sun, 30 May 2004 13:44
|
|
|
and againsedaisy
|
|
|
Location:
Adelaide
Registered:
September 2003
|
|
Re: Yet ANOTHER shed clearance (MA61/18R-G/Stigma/SW20)
|
Mon, 31 May 2004 00:54
|
|
Updated.
Bellhousing and Tensioner now soooooooooooooooollllllllllllldddddddd
|
|
|
), so NO REASONABLE OFFER WILL BE REFUSED !!!!
