| Author | Topic |
|---|
Location:
Sydney NSW
Registered:
March 2004
|
|
KE20/30, T18, celica parts clearout! Sydney.
|
Tue, 06 April 2004 12:23
|
 |
Hey Guys,
Have a whole stack of toyota parts from a different bunch of different models.
I have a 13t-c motor, complete 1800cc, carby, to sump, fan to flywheel. Same as 3t, only its the import version. Good runner. $100
***Please note - this is not a 3tgteu. I wrote 13teu but that was incorrect. it is the same as a 3t-c from a t18
I have a 3k motor and 5 speed attached. Very good motor, not rattly, not smokey, not leaky.Good clutch, has carby but no extractors. Have a tailshaft to suit ke20. SOLD
have a 4 speed manual conversion to suit a ke30/55 corolla. Pedal box, clutch, gearbox, the whole deal. $70
Very good ke20 dash pad, black, has 2 very minute hairline cracks. $50
32mm downdraft weber on k series manifold. SOLD
Have a stack of carbys, alternators, starter motors, flywheels, clutches, and dizzy's from various 3 and 4k motors. KE20 seats, t18 seats, t18 struts with brakes, brake boosters, tailshafts, Prefer to sell all together. please enquire.
Please email me at danielgrech@yahoo.com or call 0419 287 857
Cheers
Dan
[Updated on: Tue, 27 April 2004 22:36]
|
|
|
Location:
Brisbane
Registered:
July 2002
|
|
Re: KE20/30, T18, celica parts clearout! Sydney.
|
Wed, 07 April 2004 01:34
|
|
Have emailed re the Weber carbie. 
|
|
|
Location:
SOR, Perth
Registered:
October 2003
|
|
Re: KE20/30, T18, celica parts clearout! Sydney.
|
Wed, 07 April 2004 02:57
|
|
|
were abouts you located?
|
|
|
Location:
Sutherland Shire
Registered:
April 2003
|
|
Re: KE20/30, T18, celica parts clearout! Sydney.
|
Wed, 07 April 2004 07:42
|
|
|
Have you got the rear end out of the t18? ie. complete diff, axles, brakes... Thanks mate
|
|
|
Location:
Sydney NSW
Registered:
March 2004
|
|
Re: KE20/30, T18, celica parts clearout! Sydney.
|
Wed, 07 April 2004 10:19
|
|
I am in Penrith. Sorry 4-ac, dont have a t18 diff.
I also have 6 KE20 wheels with assorted tread depths. I have a set of Nissan TRX rims with ok tyres. Have a few other sets of rims manily to suit the ke30 pattern.
|
|
|
Location:
SOR, Perth
Registered:
October 2003
|
|
Re: KE20/30, T18, celica parts clearout! Sydney.
|
Thu, 08 April 2004 10:43
|
|
|
please check your PM.
|
|
|
Location:
Melbourne
Registered:
March 2004
|
|
Re: KE20/30, T18, celica parts clearout! Sydney.
|
Thu, 08 April 2004 23:56
|
|
G,day Do you have the rear sect. of a t18 tail shaft for fitment of a ra40 diff into my sprinter. If so , how much to Melb, if youre willing to seperate.
thanx
|
|
|
Location:
Hornsby, Sydney
Registered:
October 2002
|
|
|
Location:
Sydney NSW
Registered:
March 2004
|
|
Re: KE20/30, T18, celica parts clearout! Sydney.
|
Mon, 12 April 2004 04:26
|
|
sorry for the mistake there buddy,
its a 13t-c not a 13teu or a 3tgteu.
Basically the japanese version of the 3tc T18 engine.
|
|
|
Location:
Sydney NSW
Registered:
March 2004
|
|
Re: KE20/30, T18, celica parts clearout! Sydney.
|
Thu, 15 April 2004 22:22
|
|
|
Open to offers guys
|
|
|
Location:
Castle Hill, Sydney
Registered:
February 2004
|
|
Re: KE20/30, T18, celica parts clearout! Sydney.
|
Fri, 16 April 2004 11:07
|
|
|
if you dont sell that 3tc and want to get rid of it let me know ill take it off your hands
|
|
|
Location:
Castle Hill, Sydney
Registered:
February 2004
|
|
Re: KE20/30, T18, celica parts clearout! Sydney.
|
Sat, 17 April 2004 08:44
|
|
|
got a gear shift off the t-18? for a t50
|
|
|
Location:
Sydney NSW
Registered:
March 2004
|
|
Re: KE20/30, T18, celica parts clearout! Sydney.
|
Sun, 18 April 2004 00:06
|
|
|
Fresh out of shifters
|
|
|
Location:
Sydney
Registered:
May 2003
|
|
Re: KE20/30, T18, celica parts clearout! Sydney.
|
Sun, 18 April 2004 11:35
|
|
condition of ke20 seats ?
any other ke20-25 interior parts ?
|
|
|
Location:
Sydney NSW
Registered:
March 2004
|
|
Re: KE20/30, T18, celica parts clearout! Sydney.
|
Sun, 18 April 2004 22:04
|
|
The seats have a few tears in them. They are black. I have a white ke20 lower back seat, no rips.
I have a dash pad in good condition.
|
|
|
Location:
Sydney NSW
Registered:
March 2004
|
|
Re: KE20/30, T18, celica parts clearout! Sydney.
|
Mon, 26 April 2004 22:13
|
|
|
The 3k and 5 speed has been sold
|
|
|
Location:
Castle Hill, Sydney
Registered:
February 2004
|
|
Re: KE20/30, T18, celica parts clearout! Sydney.
|
Mon, 26 April 2004 23:30
|
|
how many km on that 3tc?
might be interested
|
|
|
Location:
adelaide
Registered:
April 2003
|
|
Re: KE20/30, T18, celica parts clearout! Sydney.
|
Tue, 27 April 2004 01:20
|
|
wow, someone other than me with a 13t in their car, i'd only ever seen them on engine listings.
and free bump
|
|
|
Location:
W/Gong
Registered:
April 2004
|
|
Re: KE20/30, T18, celica parts clearout! Sydney.
|
Tue, 27 April 2004 10:11
|
|
Looking for a set of KE20 front wheel hubs (*MUST* be KE10/mazda stud pattern.)
Got any.
|
|
|
Location:
Sydney NSW
Registered:
March 2004
|
|
Re: KE20/30, T18, celica parts clearout! Sydney.
|
Tue, 27 April 2004 22:23
|
|
hahah yeah, The 13t is most unusual, I was a bit shocked when I read the engine number. I'm not sure how many k's on the motor. It was in my celica when I bought it. I sold the receipts for the motor when I sold the celica. (Put a 2tg in it)
Sorry, The front struts are gone.
|
|
|
Location:
W/Gong
Registered:
April 2004
|
 Re: KE20/30, T18, celica parts clearout! Sydney.
|
Wed, 28 April 2004 02:15
|
|
|
Cheers anyway!
|
|
|
