Toymods Car Club Inc: Tech & Conversions => W58 Woes! (Sorry!!)

Toymods Car Club
www.toymods.org.au

Toymods » Tech & Conversions » W58 Woes! (Sorry!!) Show: Today's Posts :: Show Polls Email to friend

Author

Topic

KOFFEE-BLACK
Forums Junkie

Location:
Sydney
Registered:
March 2003

W58 Woes! (Sorry!!)	Thu, 15 April 2004 13:15

Hey guys, I did search, and this is what confused me, reading various post, I thought tthat the JZA80 W58 will bolt right up to a 1JZGTE, but a W58 from any other model will need a custom bellhousing. Can someone confirm if Im right here?? Sorry guys!! [Report message to a moderator]

thechuckster
Forums Junkie

Location:
Brisbane
Registered:
February 2003

Re: W58 Woes! (Sorry!!)	Thu, 15 April 2004 13:21

'cause the JZA80 gearbox comes with bellhousing that mates a W5* to a JZ series block whereas the bellhousing on the (newly installed) W5* in wilbo's 5ME cressida only mates to M series block same gearbox, different block, different bellhousing required. so your suspicions are kind-of correct - see below... [Updated on: Fri, 16 April 2004 13:49] [Report message to a moderator]

CrUZsida
Forums Junkie

I supported Toymods

Location:
Australia
Registered:
November 2003

Re: W58 Woes! (Sorry!!)	Fri, 16 April 2004 12:58

Not a custom bellhousing, but a W55/6/7/8/9 to JZ bellhousing from a JZ80 2JZGE. But that bellhousing will bolt to ANY W55/6/7/8/9 [Report message to a moderator]

Previous Topic:	rb20det restrictor
Next Topic:	AE71/86 clutch slave cylinder pushrod

Current Time: Sat Jul 26 11:39:54 UTC 2025

Total time taken to generate the page: 0.0064389705657959 seconds

.:: Contact :: Home ::.