| Author | Topic |
|---|
Location:
Brisbane
Registered:
February 2003
|
|
CT26 (or T25/T28) turbo - Bris.
|
Thu, 15 April 2004 13:35
|
 |
am after a CT26 - to replace the no integral-wastegate T04 on my RA40.
i would need the associated hardware - oil/water line flanges & wastegate actuator - except braided oil feed line (will get new one made up) - so i can plumb the thing up.
used is fine as long as there is no obvious damage to bearing/blades or compressor seal not leaking oil (it's got to last for at least 2 years of weekend use).
i would also consider T28 or T25 - as i'm only going to run 13psi of boost.
i will be adapting my existing manifold to suit so exhaust inlet pattern can be different to stock.
am looking to pay around $250-300 - or could do a swap+cash for my T04 and external wategate?
ta,
charles.
|
|
|
Location:
sydney
Registered:
April 2003
|
|
|
