| Author | Topic |
|---|
Location:
Gold Coast
Registered:
April 2004
|
|
toyota engine bits
|
Mon, 26 April 2004 06:25
|
 |
|
Can anyone tell me where is a good place/s to get a rebuild kit for a 3S GE, pistons, bearing etc ? Any help would be great.
|
|
|
Location:
Brisbane
Registered:
June 2003
|
|
Re: toyota engine bits
|
Mon, 26 April 2004 06:29
|
|
ACL in brisbane will do you for bearings, gaskets etc.
Why do u need pistons? Acl do make them though...
|
|
|
Location:
Gold Coast
Registered:
April 2004
|
|
|
Location:
Brisbane
Registered:
June 2003
|
|
Re: toyota engine bits
|
Mon, 26 April 2004 06:36
|
|
|
if its got a big end knock, expect you need to have the crank re-ground and surfaced. Depending on how bad it is. That has no relevance to the condition of the pistons tho...
|
|
|
Location:
Gold Coast
Registered:
April 2004
|
|
Re: toyota engine bits
|
Mon, 26 April 2004 06:37
|
|
I am hoping it is just mains, work out cheaper, but i'll know more once the motor is pulled down.
|
|
|
I supported Toymods
Location:
Sunshine Coast
Registered:
March 2004
|
|
Re: toyota engine bits
|
Fri, 30 April 2004 13:58
|
|
|
hey man where ever u get ur head shaved, if ur doin a rebuild..they should be able to get u all the things u need bearing,piston rings,VRS kit etc..i just rebuilt my 3sge costed about 900 all up with me doing the work..1 week later hear a knocking come to find out i spun a bearing and yeah took the engine out again and took the crank shaft in to the place that did my head work and they reground it and supplied the over sized bearing and big ends..costed 217 for thr grinf and bearings..hope u get it sorted g/l
|
|
|
