Author | Topic |

Toymods member I supported Toymods
Location: Rydalmere, NSW
Registered: May 2002
|
Clutch Master Cylinder replacement?
|
Mon, 03 May 2004 09:49
|
 |
With the GT-Four throttle body runners going in, the RAV4's clutch master cylinder is too big (from flange face to the outside edge of the oil canister). This causes one to hit the other, so the RAV4's master cylinder has had to be removed, in favour of something smaller. I need to find one that's 70mm or less from the flange face to the edge of the canister. The entire assembly will have to be recessed into the firewall, but it still needs to be smaller than what's already there.
So far I've found out that the smallest clutch master cylinder that protrudes from the firewall is one from a Nissan SX 200 (83mm). Is there one out of another Toyota that would fit?
Help needed please guys, this project is almost sowed-up.
|
|
|

Location: Brisbane
Registered: June 2003
|
Re: Clutch Master Cylinder replacement?
|
Mon, 03 May 2004 10:49

|
 |
ill measure my ma61 one for you tommorow...they dont look "overly" big...
|
|
|

Toymods member I supported Toymods
Location: Rydalmere, NSW
Registered: May 2002
|
Re: Clutch Master Cylinder replacement?
|
Mon, 03 May 2004 10:52

|
 |
Thanks for the reply.. yeah the RAV4 one didn't look that big either.
|
|
|

Location: Brisbane
Registered: June 2003
|
Re: Clutch Master Cylinder replacement?
|
Mon, 03 May 2004 10:54

|
 |
seein as you replied so fast i spose u want me to go do it now....ill let u know in 5
|
|
|

Toymods member I supported Toymods
Location: Rydalmere, NSW
Registered: May 2002
|
Re: Clutch Master Cylinder replacement?
|
Mon, 03 May 2004 10:56

|
 |
Thanks, appreciate it. 
|
|
|

Location: Brisbane
Registered: June 2003
|
|
|

Toymods member I supported Toymods
Location: Rydalmere, NSW
Registered: May 2002
|
Re: Clutch Master Cylinder replacement?
|
Mon, 03 May 2004 11:14

|
 |
Well it's better than 83mm... how easy is it to get one of these? Maybe a wrecked one?
|
|
|

Location: Sydney
Registered: February 2003
|
Re: Clutch Master Cylinder replacement?
|
Mon, 03 May 2004 11:17

|
 |
shouldn't be too hard, just go up to repco.
i picked up a slave there the other day without any hassle what so ever.
|
|
|

Location: Brisbane
Registered: June 2003
|
Re: Clutch Master Cylinder replacement?
|
Mon, 03 May 2004 11:19

|
 |
sa63/ra65 would be the same id think?
|
|
|

Toymods member I supported Toymods
Location: Rydalmere, NSW
Registered: May 2002
|
Re: Clutch Master Cylinder replacement?
|
Mon, 03 May 2004 11:22
|
 |
But do they sell master cylinders that size??
|
|
|