| Author | Topic |
|---|
Location:
Castle Hill, Sydney
Registered:
February 2004
|
|
|
Location:
nth ringwood, Victoria
Registered:
August 2002
|
|
Re: 2tg/3tc pistons
|
Sun, 09 May 2004 01:02
 
|
 |
|
trd hasnt made them for ages i have a new forged set of 88.5mm bigbore pistons and they are aries and you need a 3t crank to make it all happen, new these days about 1100 all up im asking is 700 the set
|
|
|
Location:
Castle Hill, Sydney
Registered:
February 2004
|
|
Re: 2tg/3tc pistons
|
Sun, 09 May 2004 01:39
|
|
i already have 2 of 3t cranks, blocks and sets of rods
but i neeed pistons
i've been thinking about boreing the engine out a bit bigger anyway, but thats prettttty big and about $400 more than what i was hoping to pay
cast pistons would be fine
|
|
|
Location:
Ballarat, Victoria
Registered:
March 2003
|
|
Re: 2tg/3tc pistons
|
Sun, 09 May 2004 06:50
|
|
I'm pretty sure you use either the 3tc or 2tg pistons in the hybrid, but you will need to get the valve releases machined.
talk to "the untouchable"
as he's done it. 
|
|
|
Location:
nth ringwood, Victoria
Registered:
August 2002
|
|
Re: 2tg/3tc pistons
|
Sun, 09 May 2004 07:06
|
|
|
you need 3tc pistons and you will have 2 flycut the valve relieves the same as 2tg if you decide to run some hot cams with more overlap then you could be in trouble eg thickness of the dome of cast pistons
|
|
|
Location:
Castle Hill, Sydney
Registered:
February 2004
|
|
|
