Toymods Car Club Inc: Tech & Conversions => 1jz Work In Progress

Toymods Car Club
www.toymods.org.au

Toymods » Tech & Conversions » 1jz Work In Progress Show: Today's Posts :: Show Polls Email to friend

Author

Topic

666supra
Occasional Poster

Location:
U.S.A
Registered:
July 2002

1jz Work In Progress	Wed, 04 September 2002 23:35

After every wire from my car is connected to the 1jz harness, there are like 8 wires left and have no idea where they go. It's the wires from the wide WHITE connector. Besides that it's almost ready: http://www.geocities.com/emf_supra/ecuwires.html A shot at the old engine and new engine: http://www.geocities.com/emf_supra/engine.html [Report message to a moderator]

SupraPete
Forums Junkie

Location:
Sydney
Registered:
July 2002

Re: 1jz Work In Progress	Fri, 06 September 2002 01:29

How long did it take? Who is doing it? What gearbox are you using? [Report message to a moderator]

deesonet
Regular

Location:
Toowoomba
Registered:
May 2002

Re: 1jz Work In Progress	Sat, 07 September 2002 05:54

666Supra Tell me more and I may be able to help. Is your computer a five plug or four plug unit. Is the white plug on the end of the wires to plug into the car somewhere. If so - how many wires on the plug. I traced all the wire before we pulled out our 1JZ from a JZA70 so have a list of all wires. [Report message to a moderator]

lumpy
Forums Junkie

Location:
Adelaide, SA
Registered:
May 2002

Re: 1jz Work In Progress	Sat, 07 September 2002 06:21

Are you talking about the 23 pin white socket on the 1jz harness? Looks like this? \|1 \|2 \|3 \|4 \|5 \|[ clip ]\|6 \|7 \|8 \|9 \|10\| \| \| \|11\|12\|13\|14\|15\|16\|17\|18\|19\|20\|21\|22\|23\| What colour are the wires do you have left over? Some are not used in the MA70. [Report message to a moderator]

Previous Topic:	Sprinter/4age help
Next Topic:	jamming 2tg cam

Current Time: Thu Jul 3 02:23:20 UTC 2025

Total time taken to generate the page: 0.0095629692077637 seconds

.:: Contact :: Home ::.