| Author | Topic |
|---|
Location:
Bundaberg, Qld.
Registered:
May 2002
|
|
G-tech Pro.
|
Wed, 23 June 2004 11:12
|
 |
does anyone know how accurate these things are?
|
|
|
Location:
c'town, NSW
Registered:
May 2002
|
|
Re: G-tech Pro.
|
Wed, 23 June 2004 12:14
|
|
they are as accurate as u want them to be.
and lots of fun too! 
|
|
|
I Supported Toymods
Location:
Sydney
Registered:
December 2002
|
|
Re: G-tech Pro.
|
Wed, 23 June 2004 12:56
|
|
I highly rate them... On many occasions I have used the Gtech Pro thats been around for a while but I REALLY want to get a hold of the new Gtech Pro Comp!
They're $250US but not so cheap over here...
I have heard that "Rexilla" was selling them for $400 for a while but it seems they have shut down now.
|
|
|
Location:
Melbourne, AU
Registered:
August 2003
|
|
Re: G-tech Pro.
|
Wed, 23 June 2004 23:47
|
|
|
I've been using the older red screen GTech, and comparing that to actual time slips on the drag strip seems to be about .3-.4 seconds off (still not bad considering how cheap it is). Haven't had a chance to try the new one, no doubt they have improved the measuring accuracy ... or have they?
|
|
|
Location:
Brisbane
Registered:
February 2003
|
|
Re: G-tech Pro.
|
Thu, 24 June 2004 00:06
|
|
.3 - .4 faster or is it both ways?
I've heard their readings are a little on the "optimistic" side.
|
|
|
Location:
Bundaberg, Qld.
Registered:
May 2002
|
|
Re: G-tech Pro.
|
Thu, 24 June 2004 11:41
|
|
well i have one on loan at the moment, i might go out after work on saturday and see what 12psi is pushing my over weight car at. 
might even film it too.
|
|
|
Location:
Sydney
Registered:
November 2003
|
|
Re: G-tech Pro.
|
Thu, 24 June 2004 14:20
|
|
the new g-tech pro looks sweet, it has a mini christmas tree so you can test your reaction time.
|
|
|
Location:
Bundaberg, Qld.
Registered:
May 2002
|
|
Re: G-tech Pro.
|
Sat, 26 June 2004 08:04
|
|
well we went out onto a private track..... and gave the g-tech a go.
1st run got 14.63 @ 99.8mph and the 2nd got 14.51 @ 99.4mph.
lots of wheel spin in 1st gear though, i think i might wire in a micro switch to my gear shift somewhere so that in 1st gear my dual stage is off and i only push 7psi and it turns on for 12psi from 2nd gear up....
took a small vid, it turned out kinda ok. i'll have to wait til my friend takes it off the camera.
|
|
|
