| Author | Topic |
|---|
I supported Toymods
Location:
Perth
Registered:
May 2002
|
 1G Cast IC pipes. What Size?
|
Mon, 28 June 2004 11:18
|
 |
Hey guys,
Trying to get quotes and stuff for Project Decade. Are inlet/outlets on the cast inlet pipes 2" or 2.5". My IC inlet/outlets are 2.5" and I need to work out if I'm going to need a reducer.
I don't have it here to check and from memory I vaugely remember it being in between. What has everyone else got?
Thanks,
Nathan
|
|
|
Location:
Sydney
Registered:
May 2002
|
|
Re: 1G Cast IC pipes. What Size?
|
Tue, 29 June 2004 00:39
|
|
they are two inch.
but if you remove the inlet one the throttle body is 2.25 if you want to run pipe all the way up there.
|
|
|
Location:
Yowie Bay, Sydney
Registered:
June 2002
|
|
Re: 1G Cast IC pipes. What Size?
|
Tue, 29 June 2004 11:42
|
|
|
i used all 2.25 piping when i made mine
|
|
|
I supported Toymods
Location:
Perth
Registered:
May 2002
|
|
Re: 1G Cast IC pipes. What Size?
|
Tue, 29 June 2004 11:55
|
|
|
Ok, 2.25" might be a good idea, when does everyone think I should step down from the 2.5" outlets of my IC?
|
|
|
Location:
Yowie Bay, Sydney
Registered:
June 2002
|
|
Re: 1G Cast IC pipes. What Size?
|
Tue, 29 June 2004 12:01
|
|
personally, cant see it making any difference
unless u want it 2.5 all the way to the front end of the manifold to allow for somethin custom later on
|
|
|
