| Author | Topic |
|---|
Location:
up yours!
Registered:
May 2002
|
|
compression ratios of the GZE's
|
Fri, 02 July 2004 03:20
|
 |
Prob been done before...if so please post link 
I need to know the ratio of the three series engines, i always believed that the series three (small port head) had the lowest comp ratio, but after physically comparing to a series two, the series two had the biggest dish, thus lowest comp ratio (with out taking head in to consideration)
please help asap as iam about to send off a set of series 2 to the USA (CP pistons) for a new set.....
|
|
|
Location:
Wollongong, NSW
Registered:
October 2003
|
|
|
Location:
up yours!
Registered:
May 2002
|
|
Re: compression ratios of the GZE's
|
Fri, 02 July 2004 03:27
|
|
|
thanks for that mate.......and even a local boy!
|
|
|
Location:
Wollongong, NSW
Registered:
October 2003
|
|
Re: compression ratios of the GZE's
|
Fri, 02 July 2004 03:28
|
|
|
Haven't seen the Celica around for a while, what's doing??
|
|
|
Location:
up yours!
Registered:
May 2002
|
|
Re: compression ratios of the GZE's
|
Fri, 02 July 2004 03:31
|
|
dont take her out to much anymore...
pulled the engine out over the weekend and found a suspect bearing and cracked ring.
so just getting things done right before it all goes back together.
was running 352hp at 13psi before i pulled it apart
|
|
|
Location:
Wollongong, NSW
Registered:
October 2003
|
|
Re: compression ratios of the GZE's
|
Fri, 02 July 2004 03:39
|
|
|
ah ok. f*ck it must get along! I don't remember ever seeing it cop stick
|
|
|
Location:
up yours!
Registered:
May 2002
|
|
Re: compression ratios of the GZE's
|
Fri, 02 July 2004 03:45
|
|
its had a couple of hits past the north gong, but thats about it. 
I learnt the hard way along time ago not to kill it everywhere
|
|
|
Toymods Social Secretary
Location:
Sydney
Registered:
July 2002
|
|
Re: compression ratios of the GZE's
|
Fri, 02 July 2004 03:53
|
|
yeah the earlier GZE's (bigport) had 8.0:1 pistons
later model (smallports) have 8.9:1 pistons.
|
|
|
