| Author | Topic |
|---|
Location:
Perth
Registered:
June 2004
|
|
|
Location:
Melbourne
Registered:
October 2003
|
|
Re: Glenn's TOYCSX '89 Toyota Camry CSX
|
Sat, 10 July 2004 04:56
 
|
 |
WHAT AN AWESOME CAMRY!!!!!!!!!!!!!!
Those rims look perfect for the car, so does the White paint!!!!
NICE WORK GLENN
Neons aren't usually my thing but it looks really neat!!!!!
| Quote: |
Standard Pod Filter
|
What brand pod filter did these camrys come factory with??? 
Just having a muck around hahahaha
|
|
|
Location:
Western Sydney, Cabramatta
Registered:
April 2004
|
|
Re: Glenn's TOYCSX '89 Toyota Camry CSX
|
Sat, 10 July 2004 12:58
|
|
Neat ride man!!
Keep up the good work 
|
|
|
Location:
toowoomba qld
Registered:
March 2004
|
|
Re: Glenn's TOYCSX '89 Toyota Camry CSX
|
Sat, 10 July 2004 14:44
|
|
FARK YEAH!  THATS SWEET!!!!
|
|
|
Location:
Sydney
Registered:
November 2003
|
|
Re: Glenn's TOYCSX '89 Toyota Camry CSX
|
Sat, 10 July 2004 22:32
|
|
get it a bit lower, loose the neons and tint the tail lights and i reckon itll too fkn fat! thats wat i wanted my wagon to look like but decided to bail on the project.
keep up the good work dude.
|
|
|
Location:
Perth
Registered:
June 2004
|
|
Re: Glenn's TOYCSX '89 Toyota Camry CSX
|
Sun, 11 July 2004 06:34
|
|
Cheers guys,
alot of hard work has gone into gettin it the way it is.
In relation to the pod filter, i only got a 3A racing pod filter, its still performs good, but its only shitty in my books.
Was about to get stainless chrome piping done for the pod filter and get a K&N.
Have got an extra bonnet and have put a ford cosworth scoop on the passenger side, i will then have the pod filter mounted under that. And the bonnet painted black.
All these plans have gone on hold since i did the botom end.
lol
No point in working on a pod filter and piping and custom bonnet if u got no motor.
In relation to the neons,
Im not a great fan of them either, tho i do think mine set my car off at night. As long as they are mounted correct and u cant see the tubes, they seem to look okay. Have them on a switch aswell, so they not on all the time.
My rims, i love them, took a bit of looking around to find a set that matched my car. But they really have almost finished off my car in the looks department.
My next project car i want to look at will be a Camry Wagon SV21
Im gonna do a nice big sound system setup in the back. should look sweet.
I did have my rear tail lights tinted, but i got done by mr. piggy wiggy for them.
So had to change them back. Doesnt look too bad wid the tint i dont think, but i like both ways.
Cheers guys! 
|
|
|
Official Cruise Dude
Location:
liverpool
Registered:
March 2004
|
|
Re: Glenn's TOYCSX '89 Toyota Camry CSX
|
Sun, 18 July 2004 04:03
|
|
|
thanks. what u said about the graphics looks better with out them cool neons
|
|
|
Location:
Parramatta
Registered:
April 2003
|
|
Re: Glenn's TOYCSX '89 Toyota Camry CSX
|
Sun, 18 July 2004 05:59
|
|
|
where did u get ur toyota sticker at the front window
|
|
|
Location:
Perth
Registered:
June 2004
|
|
Re: Glenn's TOYCSX '89 Toyota Camry CSX
|
Mon, 19 July 2004 12:20
|
|
Made it myself dude, im a graphic designer and i work at a sign shop, so that explains it.
Cheers, i think it looks alot better without the graphics myself.
|
|
|
Location:
Perth
Registered:
June 2004
|
|
Re: Glenn's TOYCSX '89 Toyota Camry CSX
|
Mon, 19 July 2004 12:24
|
|
Im about to drop a new engine into ToyCsx and im looking at upin the power a little, im sticking with the 3SFE, but im looking at a reconed engine and a front cut from japan that has only done 50,000km's.
I have been looking at a Microtech ECU to replace the standard ECU, but i have been just told about a Unichip.
Can anyone advise me on what they think would be the better option, or has anyone used these ECU's?
|
|
|
I supported Toymods
Location:
Perth
Registered:
May 2002
|
|
Re: Glenn's TOYCSX '89 Toyota Camry CSX
|
Mon, 19 July 2004 12:32
|
|
| TOYCSX wrote on Mon, 19 July 2004 20:20 |
Cheers, i think it looks alot better without the graphics myself.
|
Dude, I personally think you shouldn't do anything to your car unless it is what you like. I've had the same thing with my car, but i've decided to stick to what I wanted. If you don't like the graphics, or the neons remove them, don't pander to other peoples tastes
Personally, I reckon you'd probably be better off with a Microtech than a Unichip, but having said that, I'd be buying a 3SGE or something more powerful before I lashed out on a new ECU.
|
|
|
|
 Re: Glenn's TOYCSX '89 Toyota Camry CSX
|
Mon, 19 July 2004 12:47
|
|
Thumbs up mate, awesome car!
Ive got a 88 VZV21 Camry with the 2VZFE V6.
Will have pic up on the 20th of July (Hopefully )
Love the interior, has given me some good ideas for mine.
You should use the V6. Is an awesome engine. Very good power
and sound MAD. Very very deep for a 2.5L!!
Once again man, awesome car. Plz check out mine when you got the time and tell me what you think.
Regard.
|
|
|
Location:
Sydney
Registered:
September 2003
|
|
|
Location:
toowoomba qld
Registered:
March 2004
|
|
Re: Glenn's TOYCSX '89 Toyota Camry CSX
|
Tue, 27 July 2004 07:05
|
|
| smt_007 wrote on Sun, 25 July 2004 22:23 |
Damn how could i miss this , Very Nice Man , I love the Interior and Exterior, keep up the good work .
Can you help me?, my camry has a smoking problem  .
|
best Camry burnout ever!!!!!!!!!!!! 10 out of 10 no joke but that thing looks like it would get a fucking lot more smoke then me mates VL! that VL's a shocker hey and every one says Camrys are crap? well I say, CAMRY POWAH!!!!!!
nice burnout mate, good effort
|
|
|
Location:
Campbelltown, NSW, Austra...
Registered:
January 2004
|
|
Re: Glenn's TOYCSX '89 Toyota Camry CSX
|
Tue, 27 July 2004 09:33
|
|
Good to see there are still some SV21 peoples around.
TOYCSX ur car looks great, visual mods can look good when done right.
The '21 is a well put together car, if mine was a manual i would be keeping her for longer, instead i have less than a year still im selling up and moving on.
|
|
|
|
|
|
Location:
Perth
Registered:
June 2004
|
|
Re: Glenn's TOYCSX '89 Toyota Camry CSX
|
Wed, 28 July 2004 09:51
|
|
Nah mate, they are screwed up into the dash so you cant see them, my opinion is that neons look shit if u can see the tube, they are too bright and look tacky.
The GLOW is what neons are all about.
Hide the neons as far back under the dash as u can.
Its a easy job.
Basically, i marked where i could put the neon without seeing the tube.
Took the panel out.
Mounted the neon with 2 small screws.
drilled a hole next to the wire, and cut the wire to poke through the panel so it came out the other side (inside the dash)
and then wired it into my power distributer box.
If you need any more info just email me mate.
|
|
|
|
|
Re: Glenn's TOYCSX '89 Toyota Camry CSX
|
Wed, 28 July 2004 10:25
|
|
Thanx dude, very helpful... Im in the process of trying it now. If I need any more help, I'll email you. Thanx a million.
(PS. I agree...Neon's look really tacky when u can see the tube. especially when they are Undercar and you see the tubes hanging down!!! Yuck!!)
|
|
|
Location:
Perth
Registered:
June 2004
|
|
Re: Glenn's TOYCSX '89 Toyota Camry CSX
|
Wed, 28 July 2004 10:30
|
|
no shit, and if your puttin a set of undercar neons in a camry.
There are perfect hiding spots on the sides and at the back and front. just email me if you need to know anything.
|
|
|
Location:
Perth, WA
Registered:
September 2003
|
|
Re: Glenn's TOYCSX '89 Toyota Camry CSX
|
Wed, 28 July 2004 14:24
|
|
Once again - top Camry Glenn!
Some mods done on cars look tacky - but i think your's are done nicely, and really looks the part.
as JCMF said - its all about personalising a car to YOUR tastes, don't worry about what other people think, as long as you like it - go nutz!!
I think your car looks awesome anyways - Look forward to seeing it on the next OldSkool cruise!
DAMO
TRD 83
|
|
|
Location:
Perth
Registered:
June 2004
|
|
Re: Glenn's TOYCSX '89 Toyota Camry CSX
|
Thu, 29 July 2004 09:55
|
|
cant wait!!! 
|
|
|
Glenn's TOYCSX '89 Toyota Camry CSX
Re: Glenn's TOYCSX '89 Toyota Camry CSX