| Author | Topic |
|---|
Location:
Toowoomba
Registered:
May 2002
|
|
URGENT: RA23 windscreen rubbers
|
Wed, 11 September 2002 01:20
|
 |
|
Can anyone tell me if TA22 or RA21 rubbers will fit into my RA23? Toyota have genuine ones for almost $200 each and 20,21 and 22's are all that rare spares list. What about other cars?? Response needed urgently.
|
|
|
Location:
near chris and murray vic
Registered:
July 2002
|
|
Re: URGENT: RA23 windscreen rubbers
|
Wed, 11 September 2002 04:26
|
|
|
from what i can understand, the whole doors are the same, as i actually have TA 22 doors on mi car
|
|
|
Location:
Toowoomba
Registered:
May 2002
|
|
Re: URGENT: RA23 windscreen rubbers
|
Wed, 11 September 2002 05:01
|
|
|
Interesting info, but i'm really just after info about the windscreen seals. I got some measurements and they look to be completely wrong but I was thinking maybe RT140 corona ro commodore or something. Might contact a windscreen place.
|
|
|
Toymods Board Member
I supported Toymods
Location:
Turramurra, Sydney.
Registered:
May 2002
|
|
Re: URGENT: RA23 windscreen rubbers
|
Wed, 11 September 2002 07:04
|
|
Yes, they will fit.
TA-22s have exactly the same windows, and an RA21 would just be a 2L TA-22 shaped celica that came out in amerika or canada or some other country, as far as I can gather.
I actually have the Rare Spares rubbers in my '23, and they are a good fit. Although the dick that installed them didn't use any sealant, so I still have to get the rear one pulled out & sealed up properly (I had the front 'screen replaced & properly sealed a little while back).
|
|
|
Toymods Social Secretary
Location:
Sydney
Registered:
July 2002
|
|
Re: URGENT: RA23 windscreen rubbers
|
Wed, 11 September 2002 15:06
|
|
perhaps that might stop my car from leaking onto my feet when it rains....
how much did ur rubbers and fitting cost joel?? (im assuming of course this all applies for an RA28)
|
|
|
Location:
Toowoomba
Registered:
May 2002
|
|
Re: URGENT: RA23 windscreen rubbers
|
Wed, 11 September 2002 22:51
|
|
|
joel, those were the RA21 rubbers? I might see if I can get a set in them. Were they for both the front and back ones?
|
|
|
Location:
Toowoomba
Registered:
May 2002
|
|
Re: URGENT: RA23 windscreen rubbers
|
Wed, 11 September 2002 22:52
|
|
joel, those were the RA21 rubbers? Don't spose you could get the order code thing off them just to be sure? 
|
|
|
Location:
Canberra
Registered:
May 2002
|
|
|
Location:
Toowoomba
Registered:
May 2002
|
|
Re: URGENT: RA23 windscreen rubbers
|
Thu, 12 September 2002 00:18
|
|
|
thankyou, that site is most helpful. I have already emailed the guy for a quote on what I need.
|
|
|
Toymods Board Member
I supported Toymods
Location:
Turramurra, Sydney.
Registered:
May 2002
|
|
Re: URGENT: RA23 windscreen rubbers
|
Thu, 12 September 2002 05:29
|
|
I got the two windscreen rubbers at the top of the window rubber list, same part numbers (although they have gone up a whole $1 each!)
On the reciept it describes the front one as a TA20 rubber & the rear as TA20/22.
|
|
|
Location:
Toowoomba
Registered:
May 2002
|
|
Re: URGENT: RA23 windscreen rubbers
|
Thu, 12 September 2002 05:33
|
|
|
Ok thanks. I'll have a look into it.
|
|
|
Location:
Western Sydney
Registered:
May 2002
|
|
Re: URGENT: RA23 windscreen rubbers
|
Thu, 12 September 2002 09:51
|
|
|
Well and truly off topic, but Willwal, have you managed to find an 18R-GEU inlet manifold yet? Since my Celica was stolen, I've got absolutely no use for mine now. It's complete with everything the bolts onto it - apart from cold start injector which has been blocked off.
|
|
|
Location:
Canberra
Registered:
May 2002
|
|
Re: URGENT: RA23 windscreen rubbers
|
Thu, 12 September 2002 10:52
|
|
No worries 
Hope he comes home with the goods
|
|
|
Location:
Toowoomba
Registered:
May 2002
|
|
Re: URGENT: RA23 windscreen rubbers
|
Thu, 12 September 2002 22:51
|
|
RA23_Sean - Yeah I've had one sitting in my room for some time now. I'm just organising to get injectors (ones that came with it were stuffed) and en ECU and afew other bits together. Should have the rest of the bits I need in about a week or so and i'm installing it over the christmas holidays.
Thanks for the offer though.
|
|
|
