| Author | Topic |
|---|
Location:
adelaide
Registered:
April 2003
|
|
pinion and c/wheel to suit AE86???
|
Mon, 19 July 2004 01:35
|
 |
hey ppls,
just after some info as to what car i can source a required set of gears from.
currently i am wanting to put the t-18 housing in my AE 86 sprinter but dont want the 3.7 ratio.
so if anyone has info about a model i can get a crwon and pinion with a ratio abouve 3.9 i would be much greatful.
cheers,
jono
|
|
|
Location:
Brisbane
Registered:
May 2002
|
|
Re: pinion and c/wheel to suit AE86???
|
Mon, 19 July 2004 03:42
|
|
TA22/TA23/RA23/RA28 Celicas are your best bet; they came with 3.9:1 or 4.1:1 T series diffs depending on whether auto or manual.
|
|
|
Location:
Ipswich
Registered:
May 2002
|
|
Re: pinion and c/wheel to suit AE86???
|
Mon, 19 July 2004 03:46
|
|
I have 3.9 gears out of an auto RA28 you can have if you want to pay for postage  They're still on the carrier though...
I'm looking for some 4.3:1 gears... Anyone have any? 
|
|
|
Banned user
Location:
ADELAIDE - The Drift City
Registered:
July 2002
|
|
Re: pinion and c/wheel to suit AE86???
|
Mon, 19 July 2004 04:26
|
|
|
yeah jono, i used a TA22 4.1 celica diff for my TRD center. Got it all professionally setup with new bearings etc, works well as you can see
|
|
|
Location:
adelaide
Registered:
April 2003
|
|
Re: pinion and c/wheel to suit AE86???
|
Wed, 21 July 2004 04:04
|
|
cool cheers for the info ppl!!
at the moment i have a ta18 whole rear assembly. can i put a ta22 centre straight in? if i change axles?
does it affect drive shaft length, or will it bolt up to the existing AE86 stock one?
simon: i can see it works well indeed!!! did u use the whole ta22 rear assembly or just the centre?
cheers,
jono
|
|
|
Location:
Ipswich
Registered:
May 2002
|
|
Re: pinion and c/wheel to suit AE86???
|
Wed, 21 July 2004 04:37
|
|
I believe Simon used a T18 housing, with TA22 center (and carrier), T18 driveshaft... Simon: feel free to correct me if I'm wrong 
|
|
|
Location:
Baulko Hillo
Registered:
April 2004
|
|
Re: pinion and c/wheel to suit AE86???
|
Wed, 21 July 2004 05:03
|
|
|
Sorry to butt in guys, but does anyone know anything at all that may have a 4.5 or 4.7 ratio that I can use on my TRD centre???
|
|
|
Location:
Ipswich
Registered:
May 2002
|
|
Re: pinion and c/wheel to suit AE86???
|
Wed, 21 July 2004 05:27
|
|
|
AE86Slut: I'd be interested in knowing that too. The only one I know of is the 4.3:1 from the Jap Truenos/Levins(?). I've heard of a 5.1:1 TRD gearset but not sure...
|
|
|
Location:
Baulko Hillo
Registered:
April 2004
|
|
Re: pinion and c/wheel to suit AE86???
|
Wed, 21 July 2004 06:44
|
|
I'm 99% sure there is a 4.7 available from TRD or aftermarket, and a friend has been told he has a 4.5 so......
It sucks going around Wakefield and bogging down in 3rd around the first corner!!!  And only just getting into 4th before the dog-leg.
|
|
|
