| Author | Topic |
|---|
Location:
wollongong
Registered:
February 2004
|
|
|
Location:
Hornsby, Sydney
Registered:
October 2002
|
|
Re: 2t-g bits
|
Thu, 29 July 2004 08:23
 
|
 |
i have a head gasket, rear main gasket, rocker cover gasket and stem seals. also have small mech stuff like linkages to suit, the carby vacuum balance pipe and a front cover veiwing plate. etc
also have a set of webers
let me know if your keen on any of it
|
|
|
Location:
Hornsby, Sydney
Registered:
October 2002
|
|
Re: 2t-g bits
|
Thu, 29 July 2004 08:23
|
|
i have a head gasket, rear main gasket, rocker cover gasket and stem seals. also have small mech stuff like linkages to suit, the carby vacuum balance pipe and a front cover veiwing plate. etc
also have a set of webers
let me know if your keen on any of it
|
|
|
Location:
wollongong
Registered:
February 2004
|
|
Re: 2t-g bits
|
Thu, 29 July 2004 08:35
|
|
where was all this stuff when i bought the motor off you lol
i bought a 2t-g from you a while ago
what would you want for the head and rocker cover gasket and the stem seals
what is the vacuum balance pipe??
just to be sure the gaskets haven't been used rite?
thanks
|
|
|
Location:
Hornsby, Sydney
Registered:
October 2002
|
|
Re: 2t-g bits
|
Thu, 29 July 2004 09:00
|
|
the rocker cover gasket is new in packet, it doesnt have the O's to go around the spark plug holes.
the head gasket is as is. brand new of course
the stem seals are also new of course. (however) i aquired these with a celica that had a 2tg in it. the guy said all gasket that were there were for a 2tg. so its his word and i cant be 100% sure they are for.
but i paid no more for the car cause the gasket were there so he had no reason to lei to me and i'm sure he didnt just give me any old stem seals he had lying round. as most of us dont stock these items.
i would re inburse you if you bought them off me and they were in correct.
the balance pipe is the piece of pipe that goes from one side of the manifold to the other to make the vacuum the same on both sides.
would want say $70 for the gasket/ seals above
would want another 20 for the rear main seal if youre interested in that also. i paid 50 for it on trade discount not to long ago planning for its use.
cheers roadrunner
|
|
|
Location:
wollongong
Registered:
February 2004
|
|
Re: 2t-g bits
|
Fri, 30 July 2004 09:30
|
|
well that sounds good to me i dont think i will need the rear main seal i ay be getting one from elsewhere
but would you be able to post those bits to me i'll pay postage?
|
|
|
Location:
Ballarat
Registered:
September 2003
|
|
Re: 2t-g bits
|
Fri, 30 July 2004 10:38
|
|
i may have a set of lumpy cams for a 2tg soon, i repeat, may. theyve barely been used, as the 2t dropped a valve after i drove it about 2 blocks  they were done be wade in ballarat.
|
|
|
Location:
Hornsby, Sydney
Registered:
October 2002
|
|
Re: 2t-g bits
|
Sat, 31 July 2004 01:56
|
|
yeah if you want it, i'd send it cod. if youre keen pm me your address.
cheers roadrunner
|
|
|
Location:
Castle Hill, Sydney
Registered:
February 2004
|
|
Re: 2t-g bits
|
Mon, 02 August 2004 07:22
|
|
i bought my 2tg from him too!
if you dont grab the stem seals steve let me know i need some too but if i cant get them this week i'll have to buy em from toyota!
and i have the cam cover gasket and the triple O gasket for the plugs if ya want em
|
|
|
Location:
Dandenong Ranges, VIC
Registered:
July 2004
|
|
Re: 2t-g bits
|
Mon, 02 August 2004 12:25
|
|
Roadrunner
what are you after for the webers? do they come on a 2TG manifold? and what is a front cover viewing plate?
|
|
|
Location:
Dandenong Ranges, VIC
Registered:
July 2004
|
|
Re: 2t-g bits
|
Mon, 02 August 2004 12:30
|
|
The Untouchable
what are the specs of the cams and what sort of money are you after? if you want to sell them that is...
|
|
|
Location:
feilding manawatu
Registered:
August 2004
|
 Re: 2t-g bits
|
Tue, 03 August 2004 07:09
|
|
hi i got what u want all the parts for a 2t g everything
|
|
|
Location:
wollongong
Registered:
February 2004
|
|
Re: 2t-g bits revisited!!!
|
Mon, 23 August 2004 11:05
|
|
|
bump....
|
|
|
Location:
wollongong
Registered:
February 2004
|
|
Re: 2t-g bits revisited!!!
|
Wed, 25 August 2004 06:10
|
|
|
bump..... somebody.......anybody??
|
|
|
