| Author | Topic |
|---|
Club President
I supported Toymods
Location:
Sydney
Registered:
May 2002
|
|
|
Location:
Sydney
Registered:
June 2004
|
|
Re: 3T-GTE Engine, Complete
|
Sun, 01 August 2004 05:43
 
|
 |
mate LT1974 is after one in the parts wanted section. try PM them directly... there are actually a couple of people after one in the parts wanted...
a bit of match making HEY  ... i would love it but cant afford that ATM
|
|
|
Club President
I supported Toymods
Location:
Sydney
Registered:
May 2002
|
|
Re: 3T-GTE Engine, Rebuilt - Complete
|
Tue, 03 August 2004 10:58
|
|
Forgot to mention. It Includes Coils and Ignitors and the Injectors/tps etc has its own mini loom.
Perfect for an aftermarket ECU.
Keep in mind this is a fully rebuilt Engine.
$1300 ono (open to resonable offers)
|
|
|
Location:
Hobart
Registered:
July 2004
|
|
Re: 3T-GTE Engine, Complete
|
Tue, 03 August 2004 13:41
|
|
|
This sounds like a very good deal though and im interested but im in hobart and i just want to know will it bolt up to the T-50? or can i get an adaptor plate? also how many k's had the motor originally done? and was it out of a corina in japan? thanks. as my engine has a 3T-C already it should match up to the same engine mounts? do you know what needs to be done to fit it into a T-18? a friend can help me but i havent asked him yet.
|
|
|
Location:
Sydney
Registered:
June 2004
|
|
Re: 3T-GTE Engine, Complete
|
Tue, 03 August 2004 13:51
|
|
straight bolt to T-50, i believe all T series bellhouses are the same, i got a 3tgte with t50 im building now...
HOBART DAMN  mate check how much shipping would be, i know to transfer a car from QLD to SYD is $300 but a motor from SYD to TAS ..............................
you shouldnt really worry too much on what Ks it did before cause its had a rebuild...
anyway im sure toyman can take over from here... try call him
|
|
|
Location:
adelaide
Registered:
December 2003
|
|
Re: 3T-GTE Engine, Complete
|
Tue, 03 August 2004 14:17
|
|
if u want to seperate very interested in ignitors, cash waiting 
|
|
|
Club President
I supported Toymods
Location:
Sydney
Registered:
May 2002
|
|
Re: 3T-GTE Engine, Complete
|
Wed, 04 August 2004 03:36
|
|
ToyT18,
Yes mate it will bolt up to a T50 no worries at all and in Std Trim the T50 will handle it ok.
I have no Idea haw many K's it had done or what it was out of Sorry. Its as I purchased it. I haven't touched a thing on it other than have a mechanic look inside with a borascope to check the pistons and bores - ( All look great and new BTW)
As for fitting into a T-18 you may need to look at the turbo drain but otherwise I can't forsee any hassels at all.
Shipping will be a Bugger. I work 12 hours a day so won't be able to help out in that regard as I am never home sorry 
|
|
|
Location:
Adelaide
Registered:
December 2002
|
|
Re: 3T-GTE Engine, Complete
|
Wed, 04 August 2004 09:36
|
|
You have new pm!
got any recipts for the rebuild & who did the work???
|
|
|
Location:
Adelaide
Registered:
July 2004
|
|
Re: 3T-GTE Engine, Complete
|
Thu, 05 August 2004 08:57
|
|
|
Hi there, this is the LT1974 login but it is actually for my new project. Did you actually have the engine running and if so what was your opinion? I am looking at draging my new beast when finished. Also would you know an approx price on shipping to Adelaide? thanks
|
|
|
Club President
I supported Toymods
Location:
Sydney
Registered:
May 2002
|
|
Re: 3T-GTE Engine, Complete
|
Fri, 06 August 2004 00:51
|
|
The engine has not been run at all since it was rebuilt.
I have no idea on shipping costs sorry.
|
|
|
Location:
Sydney
Registered:
February 2004
|
|
Re: 3T-GTE Engine, Complete
|
Fri, 06 August 2004 07:27
|
|
|
do you have an idea of what power the engine is putting out.
|
|
|
Location:
Sydney
Registered:
June 2004
|
|
Re: 3T-GTE Engine, Complete
|
Fri, 06 August 2004 07:57
|
|
|
should be pulling bout 90rwkw i believe
|
|
|
Club President
I supported Toymods
Location:
Sydney
Registered:
May 2002
|
|
Re: 3T-GTE Engine, Complete
|
Sun, 08 August 2004 01:46
|
|
Schmitt,
As I have not had the engine running myself I don't knwo what it will produce on the Dyno. Fade-e is right tho. A stock 3T-GTE in good nick will produce around 90rwkw, give or take a few.
|
|
|
Location:
Sydney
Registered:
June 2004
|
|
Re: 3T-GTE Engine, Complete
|
Mon, 09 August 2004 11:09
|
|
guys im bumping this for ROD becuase it is so worth it!!!!!!!!!!!!!! and adding this...
i just went a picked up a 3TGTE head from him a couple hours ago and saw this motor he is selling.
guys this thing is immac!!! i wish i had my digi cam when i went for you all to see but here is a description...
- polished chrome sump
- yellow block
- normal alloy head and rocker
- polished chrome plenum and intake
now i didnt get a chance to see the turbo as i was more concerned with the head i was picking up and the car he is building (sounds like he is going to have a FREAKING BEAST!!!!!!!!!!!!  ) but the motor looks like it just came out of factory NO LIE.
not a dot of dirt or anything else for that matter other than that the chroming would need a clean with silvo or something so for the price he is selling it for it is no doubt a bargain.
now i dont know ROD and tonight was the first time i met him (TOP BLOKE TOO, pleasure meeting you!!!) and therefore have no reason to lie to you all on his behalf BELIEVE ME IT IS A SMICK MOTOR PEOPLE
as he said it is complete and in perfect nick other than fly, loom and ecu (loom and ecu can be bought from turbocaldina as he is selling it for $100) and any 2T/3T fly will fit on it as all T series are the same but i would get a lightened one off the bat for it
so who ever is interested in a 3TGTE should really consider this, im surprised he is selling it cause if it were me i would keep it spare for the one he is building and also i would buy it without hesitation if i could afford it but i cant ATM
so ROD if you dont sell it and still have it in bout 12 months ill definately take it
|
|
|
Location:
Brisbane, Queensland
Registered:
March 2004
|
|
Re: 3T-GTE Engine, Complete
|
Mon, 09 August 2004 22:59
|
|
What car did it come out of?
|
|
|
Location:
Sydney
Registered:
February 2004
|
|
Re: 3T-GTE Engine, Complete
|
Wed, 11 August 2004 08:27
|
|
|
hey toyman can youpm me your number or address and also when you are available so i can organise to come and look at it. i will also send you a pm.
|
|
|
Club President
I supported Toymods
Location:
Sydney
Registered:
May 2002
|
|
Re: 3T-GTE Engine, Complete
|
Fri, 13 August 2004 02:37
|
|
Thanks for the wrap Fade-e,
The sump is actually just painted silver but yeah the plenum is all polished and I forgot to mention it has the oil cooler attached as well.
I will hopefully be getting pics of it this weekend.
during work hours sms me on 0416 181 284 if anyone is interested.
|
|
|
Location:
Canberra
Registered:
May 2002
|
|
Re: 3T-GTE Engine, Complete
|
Fri, 13 August 2004 03:25
|
|
2T and 3T-GTE flywheels are not the same. The 3T-GTE flywheel is slightly bigger. I erlalise you did say 2T and 3T are the same, I am just making a (nice) point in case someone out there decides to jump up and down about this.
Knowing Rod (as I do) this would certianly be the bargian of the month.
|
|
|
Location:
Sydney
Registered:
June 2004
|
|
Re: 3T-GTE Engine, Complete
|
Fri, 13 August 2004 03:49
|
|
i thought al T series were the same  i guess i havent seen the 3TGTE fly but i interchanged my 2T onto my 3T and was exactly the same
if the 3TGTE is different then fair enough but i didnt know the stockies were different... oh well my mistake apologies if anyone since my post went a bought a 2T fly for a 3T 
|
|
|
Club President
I supported Toymods
Location:
Sydney
Registered:
May 2002
|
 Re: 3T-GTE Engine, Complete
|
Fri, 13 August 2004 07:42
|
|
Thanks Phil,
I didn't notice that had been posted.
All T series Flywheels have the same bolt pattern but otherwise they are different. The 2T flywheel and 2TG flywheel are the same size BUT the 2T flywhell is 12kg, the 2TG flywheel is 8kg.
The 3T-GTE flyweel has a different bolt pattern for the clutch cover and can take a wider pressure plate.
A 1G-GTE flywheel is the same size as a 3T-GTE one but I cannot confirm if they are the same weight. I actually run a Billet item on mine, I went for the smaller size pressure disc due to a wider availability of pressure plate options.
Hope that sorts any questions
|
|
|
Location:
north brisbane
Registered:
September 2003
|
|
Re: 3T-GTE Engine, Complete
|
Wed, 18 August 2004 01:30
|
|
|
hey would u b willing to seperate the plenium??? i could buy urs and give u my old one???3TGTE intake(stock).......if not its understandible...good luck wit da sale!!!!
|
|
|
Club President
I supported Toymods
Location:
Sydney
Registered:
May 2002
|
|
Re: 3T-GTE Engine, Complete
|
Wed, 18 August 2004 02:02
|
|
Sorry mate the polished plenum stays with the engine. I have a spare one if you were chasing one to have polished tho.
|
|
|
Club President
I supported Toymods
Location:
Sydney
Registered:
May 2002
|
|
Re: 3T-GTE Engine, Complete
|
Thu, 19 August 2004 15:20
|
|
Here is a pick of the engine
As you can see it has the oil cooler and the coils and ignitors are there beneath it
|
|
|
I supported Toymods
Location:
Perth, Western Australia
Registered:
December 2002
|
|
Re: 3T-GTE Engine, Complete
|
Fri, 20 August 2004 02:45
|
|
|
I cannot believe this has not sold, talk about a great deal!?! I am reminded of a conversation I had with someone on the phone the other day, where he commented that "the forums are full of fuckwits, fortunately they aren't Toymods members, and don't come to the events, so the club has a very good social atmosphere!"
|
|
|
Location:
brisbane
Registered:
August 2004
|
|
|
Club President
I supported Toymods
Location:
Sydney
Registered:
May 2002
|
|
Re: 3T-GTE Engine, Complete
|
Sun, 22 August 2004 13:33
|
|
|
Engine is still very much for sale.
|
|
|
Location:
Brisbane
Registered:
May 2003
|
|
Re: 3T-GTE Engine, Complete
|
Wed, 25 August 2004 11:52
|
|
Hey Rod,
Looks like i will take the engine, i just gotta find a freight company to carry it for me at a reasonable cost.
If you can send me an invoice ill deposit cash for ya.
Any tips on good cheap freight?
|
|
|
Location:
Brisbane
Registered:
May 2003
|
|
Re: 3T-GTE Engine, Complete
|
Mon, 13 September 2004 09:50
|
|
Hey Rod
I picked my engine up today, looks great. Cheers for those little extras. Sanding my car back this week, its gonna be Gloss Black with the engine repainted Hot Pink. Ill keep ya updated on the build. Pleasure doin business.
|
|
|
Club President
I supported Toymods
Location:
Sydney
Registered:
May 2002
|
|
Re: 3T-GTE Engine, Complete
|
Mon, 13 September 2004 22:23
|
|
|
Glad to here it arrived safely champ
|
|
|
