| Author | Topic |
|---|
Location:
Ipswich
Registered:
January 2004
|
|
RA28 parts into a TA22
|
Fri, 06 August 2004 22:53
|
 |
Hey guys,
I was wondering if the brakes/struts, seats and a few other bits (minus motor) would go into a TA22?
I can get on that has been side swiped and the motor removed by the owner. Figured if I can get it for the right price, the above parts plus seats and a few others things would be worth it.
Thanks Floppy
|
|
|
Location:
Rocklea qld
Registered:
February 2003
|
|
Re: RA28 parts into a TA22
|
Sat, 07 August 2004 04:09
|
|
|
struts and brakes(front) will fit but u will need to run atleast 14' rims. seats and carpet and door trims id say would be about all that will suit on the interier. Pm me when u get it and if i havent got my parts by then ill be interested. Im chassing both doors if in good nick and good price, possibly bonnet, interier light and good black dash parts, wiring loom but i wanna pull that out myself to mark the wires.
|
|
|
Location:
Sydney
Registered:
June 2004
|
|
Re: RA28 parts into a TA22
|
Sat, 07 August 2004 06:01
|
|
- with the struts they will need to be shortened by an inch otherwise the TA22 will sit high
- whle interior is interchangeable other than dash
and rear quarts
- doors are the same
nothing else, the RA28 is longer and different front end, different rear end too (the 28 is the mustang right  )
|
|
|
Location:
Ipswich
Registered:
January 2004
|
|
Re: RA28 parts into a TA22
|
Sat, 07 August 2004 15:07
|
|
Thanks,
Yeah the ra28 is the mustang style as far as I know.
I went for a drive tonight where it was supposed to be but in the dark we couldnt see. The dude didnt get home for us to have a proper look. I'll try and catch him tomorrow, but I dont think he is going to be there either 
Nevermind, when I catch up with him I'll get a few pics and see how the doors and bonnet are. ( or which side got the swipe).
|
|
|
I supported Toymods
Location:
Perth, Western Australia
Registered:
December 2002
|
|
Re: RA28 parts into a TA22
|
Sun, 08 August 2004 03:51
|
|
|
Seats are different but can be easily modified to fit.
|
|
|
Location:
Canberra
Registered:
May 2002
|
|
Re: RA28 parts into a TA22
|
Sun, 08 August 2004 10:36
|
|
You would have to use TA22 strut tops, as the spacing of the 3 studs is different on the RA28. Seat bases are quite different in each model, and would require the fitting of the 28 seat covers onto the 22 bases.
regards Chuck.
|
|
|
Location:
Melbourne
Registered:
June 2003
|
|
Re: RA28 parts into a TA22
|
Mon, 09 August 2004 16:29
|
|
|
would the centre console fit? cuz it looks like the '22 GT 2 piece one, however its a whole...
|
|
|
