| Author | Topic |
|---|
Location:
Sunshine Coast QLD Austra...
Registered:
July 2004
|
|
4K worked
|
Sat, 14 August 2004 13:26
|
 |
Does anyone have a worked 4k they would want to sell me for my KE35
after a 4k with 3k head
valves done
big cam
extractors
valve springs
carb
and everything else???
dont have the space to do it myself anyone geting rid of one for a 2tg or age conversion
|
|
|
Location:
Brisbane
Registered:
July 2002
|
|
Re: 4K worked
|
Sat, 14 August 2004 14:49
|
|
This should go in the 'wanted' section.
SuperJamie might sell you his if you speak to him nicely (or make him an offer he can't refuse). 
|
|
|
On Probation
Location:
North East NSW
Registered:
December 2002
|
|
Re: 4K worked
|
Sun, 15 August 2004 10:44
|
|
well this one set me back 2 grand, so anything more than that and you've got yourself an engine, and i'll just build a better one
or you could build a better one yourself probably for under $1000. hindsight is better than foresight 
|
|
|
Location:
Sunshine Coast QLD Austra...
Registered:
July 2004
|
|
Re: 4K worked
|
Sun, 15 August 2004 12:05
|
|
|
hey man i really could only get a grand at max you couldnt help me out anyway with hookin me up with any desent 4k?
|
|
|
Location:
Brisbane
Registered:
July 2004
|
|
Re: 4K worked
|
Sun, 15 August 2004 12:27
|
|
|
how bullshit do you want to go? i looked at a 4k a 5k and 3k yesterday and this guy was nuts, hes got everything you could think of including 5k on methanol bored to 1600cc with comp ratio of 14:1, he has heads, blocks, 4k block bored 30thou, ported heads, bullshit stromberg twin jetted carbs, the works all for sale, he lives in brisy, if you want his details pm me
|
|
|
Location:
Sunshine Coast QLD Austra...
Registered:
July 2004
|
|
Re: 4K worked
|
Sun, 15 August 2004 13:11
|
|
|
yes could i please I REALLY WANT A CHEAP TOUGH 4K TO BOLT IN LOL
|
|
|
Location:
Brisbane
Registered:
July 2002
|
|
Re: 4K worked
|
Sun, 15 August 2004 13:19
|
|
| scano wrote on Sun, 15 August 2004 22:27 |
how bullshit do you want to go? i looked at a 4k a 5k and 3k yesterday and this guy was nuts, hes got everything you could think of including 5k on methanol bored to 1600cc with comp ratio of 14:1, he has heads, blocks, 4k block bored 30thou, ported heads, bullshit stromberg twin jetted carbs, the works all for sale, he lives in brisy, if you want his details pm me
|
That's not Doug by any chance?
SuperJamie would be a valuable source of info - I believe there are pics of his buildup on Demuire's website. Other than that, he can assist with what to do.
Your best source of info is to try the Oldcorollas site.
|
|
|
Location:
Kita-Ku, Sapporo, Japan
Registered:
January 2003
|
|
Re: 4K worked
|
Mon, 16 August 2004 04:36
|
|
we can tell you what you need to do and buy, but you should either build it yourself, or find an engine builder.
it's much more fun that way, and you don't need a lot of space.
i'd probably build one for a grand for labour, parts extra. otherwise it's not really worth my time.
Cya, Stewart
|
|
|
Location:
Adelaide, SA
Registered:
May 2002
|
|
Re: 4K worked
|
Mon, 16 August 2004 04:52
|
|
Wreckers usually have lots of K series parts... but rarely anything *K-B in my experience Was down at upullit on the weekend... about 5 KE3x's with the 4-2-1's on them!
We're currently slowly building up the engine, one day we'll pull it out and do the major work like rings, bearings, cam, head, etc.
Using a standard 4k carby atm... earlier model (KE50??) We did have a 3K carby on there but it decided to fail somehow and just dumped fuel in all the time (cbf pulling it apart).
Good fun motor... with a bit of work they can be nice to drive every day
Oh yeh, the 4-2-1's hit the gearbox crossmember and part of the firewall on a KE70 Such an annoying noise!
|
|
|
