| Author | Topic |
|---|
Location:
Sunshine coast, QLD
Registered:
May 2004
|
|
firewall modification...
|
Tue, 24 August 2004 15:26
|
 |
Hey,
Is it legal to modify the firewall of an 86 in QLD. I am planning to hopefully do a 20v conversion and jsut cutting the firewall would make it a lot easier and cheaper
Thanks...
By the way if anyone who has had experience with the conversion could help me i'd be very grateful..
|
|
|
Location:
Sunshine coast, QLD
Registered:
May 2004
|
|
Re: firewall modification...
|
Tue, 24 August 2004 22:09
|
|
*bump*
Come on someone must know?
By the way by asking someone for help with the conversion I just mean talking to about problemsor questions I have, not literally helping
Thanks 
Gavin
|
|
|
Location:
Brisbane
Registered:
May 2002
|
|
Re: firewall modification...
|
Tue, 24 August 2004 22:46
|
|
You need to talk to a certified engineer about this; the opinions of a bunch of random car nuts on the internet means jack shit! I deal with John Kean (I have his contact details at home), give him a call and he'll tell you what you need to do to make it legal.
|
|
|
Location:
Sydney (Campbelltown...!)
Registered:
December 2003
|
|
Re: firewall modification...
|
Wed, 25 August 2004 12:20
|
|
|
individual coil packs and aftermarket computer...
|
|
|
Location:
Adelaide
Registered:
July 2002
|
|
Re: firewall modification...
|
Thu, 26 August 2004 00:48
|
|
sledgehammer + firewall = recessed firewall 
|
|
|
Location:
Melbourne
Registered:
January 2003
|
|
Re: firewall modification...
|
Thu, 26 August 2004 00:58
|
|
|
Or modify the dissy to run though the front cam cover , or you can use a decoder box and run a crank angle sensor in the dissy case so the firewall remains stock , then use cgi ignition . Lots of options .
|
|
|
I supported Toymods
Location:
NY
Registered:
May 2002
|
|
Re: firewall modification...
|
Thu, 26 August 2004 02:12
|
|
|
use a big hammer, not too helpful but it may work
|
|
|
Location:
Brisbane
Registered:
November 2003
|
|
Re: firewall modification...
|
Thu, 26 August 2004 10:57
|
|
I did the firewall cutting method and managed to get engineered in qld.. remember you need a heater aswell....
If i did it again i would take one of the above options tho!
|
|
|
Location:
Baulko Hillo
Registered:
April 2004
|
|
|
