Author | Topic |
Location: Melbourne
Registered: August 2004
|
Wanted: 1G (and variants) flywheel.
|
Mon, 30 August 2004 05:43
|
|
After a flywheel to suit a 1ggze (6bolt)
After one that has the pin measures at 265mm and friction surface at 225mm
I think its the larger variant of the 1G flywheel off a 1ggte.
Just throwing a line out.
cheers
Tonka.
|
|
|
I supported Toymods
Location: Plumpton/sydney
Registered: November 2003
|
Re: Wanted: 1G (and variants) flywheel.
|
Mon, 30 August 2004 12:43
|
|
PM CLG or EVILJACK
|
|
|
Location: Melbourne
Registered: August 2004
|
Re: Wanted: 1G (and variants) flywheel.
|
Mon, 30 August 2004 12:50
|
|
Cheers.
|
|
|
I supported Toymods
Location: Sutho/Hills NSW
Registered: September 2002
|
|
|
I supported Toymods
Location: Plumpton/sydney
Registered: November 2003
|
Re: Wanted: 1G (and variants) flywheel.
|
Mon, 30 August 2004 13:09
|
|
Sorry my bad
|
|
|
Location: Melbourne
Registered: May 2002
|
Re: Wanted: 1G (and variants) flywheel.
|
Tue, 31 August 2004 08:20
|
|
I have a 1ggteu flywheel from a gen 1 1g, it has a 225mm friction plate as you ask for and could you please explain wat you mean by the pins? The ring gears on the flywheel are in very good condition, unfortunatly better than wat i replaced it with, but the replacement item had a bigger clutch. Though i would like to have rid of the clutch with the flywheel.
PM me if you are interested
Cheers Adam
|
|
|
Location: Melbourne
Registered: August 2004
|
Re: Wanted: 1G (and variants) flywheel.
|
Tue, 31 August 2004 23:12
|
|
PM sent!
|
|
|
Location: Melbourne
Registered: August 2004
|
Re: Wanted: 1G (and variants) flywheel.
|
Fri, 03 September 2004 12:47
|
|
Still looking.
|
|
|
Location: Castle Hill NSW
Registered: March 2003
|
Re: Wanted: 1G (and variants) flywheel.
|
Tue, 07 September 2004 04:59
|
|
rob_ra40 has one i think
|
|
|
Location: Melbourne
Registered: August 2004
|
Re: Wanted: 1G (and variants) flywheel.
|
Wed, 08 September 2004 01:14
|
|
Found one last night!
Cheers!
|
|
|