| Author | Topic |
|---|
Location:
Sydney, Australia
Registered:
November 2003
|
|
4agze tacho wiring
|
Mon, 30 August 2004 08:28
|
 |
-car: ae92 corolla sx
-engine: 4agze off ae92 gtz trueno
how would i go abouts wiring the tacho in a corolla sx dash to the 4agze computer?
i manage to salvage this from searching this forum :
[From Igniter]----||----T----->[Tacho]
1uf |
cap 10k resistor
|
V
Ign+
just wondering, wount i have to run it off all the Igniters?
and how do i do that?
|
|
|
Location:
sydney
Registered:
March 2003
|
|
Re: 4agze tacho wiring
|
Mon, 30 August 2004 12:22
|
|
i have a device to get yr tacho goin
these usually only work on toyotas and microtechs
|
|
|
Location:
stanthorpe, qld
Registered:
August 2004
|
|
Re: 4agze tacho wiring
|
Mon, 30 August 2004 23:39
|
|
|
usually the stock computer has a tach output
|
|
|
Location:
sydney
Registered:
March 2003
|
|
Re: 4agze tacho wiring
|
Tue, 31 August 2004 02:54
|
|
ig- is the tacho output
this comes from the ignitor or the diag plug
this drives the tacho on most efi toyotas
if u want to use this then u need a signal booster
it is only for multi coiled engines
|
|
|
Location:
cambo
Registered:
May 2002
|
|
Re: 4agze tacho wiring
|
Tue, 31 August 2004 07:20
|
|
|
you should have searched this has been covered before. you can buy a tacho adapter for around $50-$80, or you can make it yourself for approx 50c. if you know how to use a soldering iron, and you have a dicksmith's near by, PM me for a wiring diagram.
|
|
|
