| Author | Topic |
|---|
Location:
Melbourne
Registered:
May 2002
|
|
1ggte Billet cams
|
Tue, 31 August 2004 09:03
|
 |
As the topic says i am after these, i would like to know where these items are able to be purchased and how much they would cost? Any help would be appriciated.
Cheers Adam
|
|
|
Location:
Ballarat, Vic.
Registered:
February 2004
|
|
Re: 1ggte Billet cams
|
Tue, 31 August 2004 10:56
|
|
its a long shot, but call either crow or camtech, [sorry dont have numbers] or look in the HKS/JUN/TRD ect. catalouge.
HKS probably.
why do you want billets? there is no real point in getting custom cams ground, all the work has already been done by big tuning companies.
well, my 2c.
M.
|
|
|
I supported Toymods
Location:
south of the big smoke
Registered:
May 2002
|
|
Re: 1ggte Billet cams
|
Tue, 31 August 2004 11:16
|
|
yeah for standard setups!! to bad they didnt come standard with a gt30 
|
|
|
Location:
Melbourne
Registered:
May 2002
|
|
Re: 1ggte Billet cams
|
Wed, 01 September 2004 17:32
|
|
Well yeah thats the thing, custom setup will require a custom cam grind. I have tried crow, wade, ivan tighe and clive cams and they all tell me the same thing. They dont know if they can get billets and i doubt if they have even tried though it will cost in the vecinity of $1250 for a reweld and regring on the cams. Unfortunatly the design of the 1g head does not allow you to do just a regrind and machine down the lifter block if nessecery becuase the cams sit on top of the lifter housing. Thus the reason for wanting billets is because the cost would then only work out to about $800 odd mark to have the job done.
If any1 knows anything about these i beg of you PLEASE tell me!!!!
Cheers Adam
|
|
|
Location:
Brisbane
Registered:
October 2002
|
|
Re: 1ggte Billet cams
|
Thu, 02 September 2004 06:54
|
|
|
billets are very expensive, like $1k minimum, if u r lucky, i was quoted $1k for rewelds and grinds for a 7MGE
|
|
|
Location:
Melbourne
Registered:
May 2002
|
|
Re: 1ggte Billet cams
|
Thu, 02 September 2004 07:21
|
|
Ah just that i am told that billets would be cheaper than a reweld and regrind, but i havnt a price on billets to compare them with as i have nfi where to get them from.
Cheers Adam
|
|
|
