greetz all.
recently blew a voltage regulator in my ra40 and am wanting to change it over for a standard regulator......
the original regulator has the six pin oval shape plug (not common)
and have bought the more comman six pin rectangle plug regulator.
problem I have is both workshop manuals I have dont have the
australian electrical schematics (for external regulators), both manuals (by haynes) have internal regs which isnt much help
so i need to which wire is N/S, field, ground, etc.
does any one have aussie schematics with colour codes? (external regulators)
any help appreciated
tia
Re: changing VR in ra40 need a electrical schematic
Fri, 03 September 2004 10:26
i recently did this in my ta23...if u undo the tape from the wiring you will see the 3 wires going from the alternator to the regulator..u can remove the easily...in the end u should have 3 wires. ONe is the fat one. one is the light in the dash. nd one is a power wire. the fat one going to the bolt on the alternator and you just need to sort out which way the other go on the alternator plug
Fri, 03 September 2004 08:22
in my ra40 and am wanting to change it over for a standard regulator......
